SmartHeat Electrical Underfloor Heating DIY Kit with Wi-Fi Thermostat
MAINCOR: PE-RT PIPE
PE-RT pipes in Coils 300m. Working Temp 70ºC, Max Temp 95ºC,
Max operating pressure at 70ºC – 6 bar. 5 Layer technology the oxygen
barrier is protected from mechanical damage.
Details
5016003430 16×2 PE-RT Pipes 300m Coil
MAINCOR: COMPOSITE PIPE PREINSULATED
Pert Preinsulated Pipes[25m-50m Coil lengths]
Details
10016209 16×2.0 .9mm Pre insulated Pipes [Comes – 50m Coil]
10020229 20×2.25.9mm Pre insulated Pipes [Comes -50m Coil]
10025259 25×2.5.9mm Pre insulated Pipes [Comes – 50m Coil]
100323013 32×3.0.13mm Pre insulated Pipes [Comes – 25m Coil]
SmartHeat Wi-Fi Thermostat
Towel Warmer – Smart Arborescence –
Smart Arborescence allows you to benefit from a hot bath towel at all times while facilitating its access.
The fixed and smart tubes of Smart Arborescence play on the reversibility of colors to match your bathroom decor.
Detail:
FACOT FLIMAX 8.0
Special anti-corrosive anti-noise deoxygenating de-ironing additive allowing the elimination of the troublesome noise phenomena caused by excessive oxygenation of water and helping to maintain ferrous residues present in the system dispersed. It also exerts an antiscale complexing action and favours the formation of protective magnetite.
1L & 5L Available
Sanden Eco® Plus Hot Water Heat Pump System
The Sanden Eco® Plus Hot Water Heat Pump System is a highly energy-efficient replacement for your traditional electric hot water system. It absorbs heat from the air and transfers it to heat water, in a way that saves energy, saves money and reduces greenhouse gas emissions.
Sanden 315L Eco Plus Hot Water Heat Pump System 315SAQA
The Sanden Eco® Plus Hot Water Heat Pump System is a highly energy-efficient replacement for your traditional electric hot water system. It absorbs heat from the air and transfers it to heat water, in a way that saves energy, saves money and reduces greenhouse gas emissions.
Sanden 250L Eco Plus Hot Water Heat Pump System 250SAQA
The Sanden Eco® Plus Hot Water Heat Pump System is a highly energy-efficient replacement for your traditional electric hot water system. It absorbs heat from the air and transfers it to heat water, in a way that saves energy, saves money and reduces greenhouse gas emissions.
IMMERGAS SE 32kW Internal Boiler – NG
Hunt Heating’s Immergas SE Internal boiler is a traditional hydronic system boiler for internal installation that can be hung on the wall.
This 32 kW output boiler is made in Italy with natural gas & LPG as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS SE 32kW External Boiler – LPG
Immergas SE 32kW external boiler is a traditional hydronic system boiler for external installation that can be hung on the wall.
This 32 kW output boiler is made in Italy with LPG as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS InTec 30kW Internal Boiler – NG
Hunt Heating’s Immergas Intec 30kW Internal is a traditional hydronic system boiler for internal installation.
This 30kW output boiler is made in Italy with natural gas as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS InTec 30kW Internal Boiler – LPG
Hunt Heating’s Immergas Intec 30kW Internal is a traditional hydronic system boiler for internal installation.
This 30kW output boiler is made in Italy with LPG as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS InTec 12kW Internal Boiler – LPG
Hunt Heating’s Immergas Intec 12kW Internal is a traditional hydronic system boiler for internal installation.
This 12kW output boiler is made in Italy with LPG as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS InTec 30kW External Boiler – NG
Immergas Intec 30kW external is a traditional hydronic system boiler for external installation.
This 12kW output boiler is made in Italy with Natural Gas as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS InTec 12kW External Boiler – NG
Immergas Intec 12kW external is a traditional hydronic system boiler for external installation.
This 12kW output boiler is made in Italy with Natural Gas as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
Aquatehnik : THREADED MALE ELBOW (NO.19BP)
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatechnik : BALL VALVE
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatechnik : BRACKETED THREADED ELBOW F WITH ALLOY THREAD (NO.15BP)
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatechnik : THREADED ELBOW F WITH PPSU/ALLOY THREAD (NO.14)
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatechnik : THREADED JOINT F WITH PPSU/ALLOY THREAD (NO.2)
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatechnik : THREADED JOINT M WITH ALLOY/PPSU THREAD (NO.3)
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatechnik : Elbow 90°
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatechnik : REDUCED TEE safety-system
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatechnik : TEE (No.24), safety-system
Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.
The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.
Sizes
Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE, PE-X + Al + PE-X, PN 10 – 95° C, in rolls
MULTI-CALOR PIPE
The pipe used in the multi-calor system is made by integrating
different materials, resulting in the terminology “multi-layer”.
The polymer of the internal/eternal layer is crosslinked
polyethylene (PE-X, see table of values and features). This
produces pipe with very good performance with high
temperature fluids under pressure and leaves the
characteristics of potable water unchanged. During the
production process, the external cover of the pipe (PE-X) is
combined with thin aluminium alloy layers, welded lengthwise –
by laser beam plasma – and then combined with a special
adhesive to make the materials bond perfectly. The result is
that the metal (Al) is covered by a PE-X layer, protecting it from
corrosion. All the process stages are checked by computerised
quality control ensuring every batch meets the appropriate
standards.
Application fields
Ideal for sanitary systems, heating and cooling industrial plants, for the conveyance of different fluids, compressed air, noble gas and drinking or not-drinking water.
Advantages
Sizes
Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE ISOLINE, PE-X + Al + PE-X, PN 10 – 95° C, with thermal insulation λ 0,040 in RED rolls
MULTI-CALOR PIPE
The pipe used in the multi-calor system is made by integrating
different materials, resulting in the terminology “multi-layer”.
The polymer of the internal/eternal layer is crosslinked
polyethylene (PE-X, see table of values and features). This
produces pipe with very good performance with high
temperature fluids under pressure and leaves the
characteristics of potable water unchanged. During the
production process, the external cover of the pipe (PE-X) is
combined with thin aluminium alloy layers, welded lengthwise –
by laser beam plasma – and then combined with a special
adhesive to make the materials bond perfectly. The result is
that the metal (Al) is covered by a PE-X layer, protecting it from
corrosion. All the process stages are checked by computerised
quality control ensuring every batch meets the appropriate
standards.
Sizes
Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE ISOLINE, PE-X + Al + PE-X, PN 10 – 95° C, with thermal insulation λ 0,040 increased thickness, in BLUE rolls.
MULTI-CALOR PIPE
Details
LVI Towel Warmer – Muria –
The Muria R towel warmers are perfect for confined spaces, as they are cleverly designed to turn 180-degrees on your wall. All models are available in a chrome or white gloss finish.
The Muria R has an adjustable thermostat so you can always find the right temperature.
LVI Panel Radiator – Yali Parada –
The Yali Yali offers superb flexibility in controlling temperature with a minimal visual display discreetly moulded onto the side panel. The control can be touch screen and connected to WiFi. The versatile touch screen control comes in many sizes and is able to be upgraded when new functions become available.
If a significant increase in temperature is needed, the radiator can be controlled to use both radiant and convective heat.
IMMERGAS InTec 30kW External Combi Boiler – LPG
Immergas Intec Combi External is a 30 kW condensing boiler, suited for external installation.
Combination boilers are ideal for heating a hydronic heating system whilst meeting all the properties of hot water requirements.
There is no need for a separate instantaneous hot water unit.
This 30 kW output boiler is made in Italy with natural gas & LPG as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS InTec 30kW INTERNAL Combi Boiler – LPG
Immergas Intec Combi Internal is a 30 kW condensing boiler, suited for internal installation.
Combination boilers are ideal for heating a hydronic heating system whilst meeting all the properties of hot water requirements.
There is no need for a separate instantaneous hot water unit.
This 30 kW output boiler is made in Italy with natural gas & LPG as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS InTec 12kW External Boiler – LPG
Immergas Intec 12kW external is a traditional hydronic system boiler for external installation.
This 12kW output boiler is made in Italy with LPG as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS InTec 12kW Internal Boiler – NG
Hunt Heating’s Immergas Intec 12kW Internal is a traditional hydronic system boiler for internal installation.
This 12kW output boiler is made in Italy with natural gas as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS SE 32kW External Boiler – NG
Immergas SE 32kW external boiler is a traditional hydronic system boiler for external installation that can be hung on the wall.
This 32 kW output boiler is made in Italy with natural gas as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
IMMERGAS SE 32kW Internal Boiler – NG
Hunt Heating’s Immergas SE Internal boiler is a traditional hydronic system boiler for internal installation that can be hung on the wall.
This 32 kW output boiler is made in Italy with natural gas & LPG as the fuel source.
There is a guarantee of 3 years warranty on this product.
DETAILS:
WISELIVING Dynamic 2500 Boiler
The Dynamic 2500 delivers a hydronic heat output of 25 kWh.
It is a compact and economical option, this boiler is the smallest in the Dynamic Series range and is highly compact and will yield optimum results with frequent refuelling.
WISELIVING Belvedere 5000 Boiler
WISELIVING Thermalux Grand Cuisine Oven
With four genuine ovens, an enormous main hotplate, a removable 250 mm drop scone hotplate (which can be easily removed), and two simmer plates, the Grand Cuisine is perfect for cooking, entertaining or for commercial application.
The ovens are self-cleaning and independently adjustable. The firebox is able to take timber up to 450 mm long.
The Grand Cuisine oven offers various hot water options including:
The stove can reach up to bench height (900 mm) when installing on concrete floors with a plinth.
DETAILS:
WISELIVING Supreme III CD Hydronic Oven
The Supreme is very robust by nature, constructed from cast iron, heavy gauge steel and stainless steel components. All ovens are manufactured from thick plate steel, which extends the burning time. The Supreme series is designed and built to last up to 50 years or more.
In the Supreme series, there are different hydronic options including:
The Supreme CD (central heating cooker) has a heat output of 20 Kw- one of the highest heat outputs on the Australian market. The CD has an additional air control which provides for greater combustion. The Thermalux Supreme CD will run hydronic radiators or underfloor coil heating to heat up to a 200 m2 (20 sq) home.
DETAILS:
WISELIVING Gourmet Cooker
With an optional hot water jacket-wet back included, this gourmet cooker can altogether heat, cook and provide hot water to meet all your family’s needs.
The Gourmet is best placed in the lounge, dining or family room as a space heater and can also be sited in the kitchen as a cooker if desired. The unique venting system makes for easy control of oven temperatures for all cooking requirement
WISELIVING Clarendon Thermalux Stove
WISELIVING Sophel Hydronic Boiler
Wiseliving’s Sophel is a versatile hydronic boiler suitable for any type of aesthetic space, whether it be rustic, old or modern.
A slow, elegant combustion exudes into the room while delivering a neutral distribution of warmth to each room in the home.
WISELIVING Linea Hydronic Boiler on Legs
Hidew ROE/RVE Heat Recovery Unit
The quality of the air and its purity, temperature and humidity are fundamental elements for comfort, especially in the winter.
A controlled mechanical ventilation system is the best solution to maintain both the energy performance levels of a building and the quality of indoor air.
To achieve indispensable air exchange in a building and ensure good air quality in the rooms, it is fundamental to install a controlled mechanical ventilation system. The renewal of air in the rooms is in fact indispensable for correct housing hygiene.
HiDew ROE and RVE heat recovery controlled mechanical ventilation is the best solution to reduce the energy usage of the home while improving the overall cleanliness of the rooms.
Hidew REV Residential Dehumidifier
The adjustable electronic fans with permanent magnet brushless motor with latest generation built-in inverter, guarantee a high head and optimize electricity consumption.
Hidew RER Residential Dehumidifier
The adjustable electronic fans with permanent magnet brushless motor with latest generation built-in inverter, guarantee a high head and optimize electricity consumption.
Hidew RSV Residential Dehumidifier
Hidew RSO/RSE Residential Dehumidifier
Hidew STR Swimming Pool Dehumidifier
Hidew SPR Swimming Pool Dehumidifier
SPR units are the ideal answer when a swimming pool requires a strong exchange of internal air without dispersing the heat of the internal environment outside.
Hidew ST Swimming Pool Dehumidifier
The dehumidifiers of the IT and ST series are designed for use in environments with a high latent load, where 24h / day operation is required.
Thanks to the temperature control function, through a remote external condenser, these units guarantee control, not only of humidity, but also of ambient temperature.
Hidew SP Swimming Pool Dehumidifier
Hidew DOS Swimming Pool Dehumidifier
Designed for suspended ceiling installation, they can also be supplied with all air distribution accessories such as plenums, grids, channels. The series consists of 7 models, from 67 up to 225 L / day.
Hidew DVS Swimming Pool Dehumidifier
The new DVS series dehumidifiers with advanced control are designed for use in small private pools where vertical installation is required. The pleasant design also perfectly adapts to other environments, such as museums, libraries, archives and cellars.
Designed for installation directly in the room to be dehumidified, they have an elegant aesthetic. The series consists of 7 models, from 68 up to 230 L / day.
Hidew DCS Swimming Pool Dehumidifier
The dehumidifiers of the DCS series with advanced control are designed for use in small private pools where wall installation is required. The DCS is suitable for environments such as museums, libraries, archives, cellars and underground rooms.
Hidew DDS Swimming Pool Dehumidifier
The dehumidifiers of the DDS series with advanced control are designed for use in small private pools where wall installation is required. The DDS is suitable for environments such as museums, libraries, archives, cellars and underground rooms.
Klover Smart 120 British Traditional Pellet Boiler Cooker
The Smart 120 BT has the same high efficiency and automation of the contemporary Smart 120 but with a more traditional look.
With its clean, elegant lines, the Smart BT will happily fit into any kitchen. It might look like a traditional solid fuel cooker but it will be quietly taking care of the central heating and hot water as well as providing a hot oven and a hotplate to cook on.
The Smart 120 BT is available in black, red and cream and has optional hob covers.
Klover DEA ECO 6.8.12
With a choice of three outputs, 5 kW or 9.6 kW, the DEA ECO 6, DEA ECO 8, and DEA ECO 12 are capable of heating a good-sized space but without the need for plumbing or radiators.
With the cosiness of a real flame and the automation of a pellet stove, they offer an inexpensive and straightforward solution to almost anyone.
The DEA ECO radiant pellet stoves are characterized by their technical excellence, the high quality materials used in their construction and the elegance of their design.
Klover STORIKA K-KP Wood Boiler Cooker
STORIKA K-KP is a multi-functional wood boiler designed to warm up your whole home and it can also be used as a cooktop range too.
All your radiators will quickly become hot with minimum log usage, spreading heat in every room whilst supply domestic hot water for the whole family.
DETAILS:
Net weight: 250 kg
Dimensions W x H x D: 1000 x 870 x 600 mm
Klover PFP 240 GLASS Insert Fireplace
Klover PFP 240 GLASS has an efficiency of over 90% at full power and an astonishing 95.9% efficiency at reduced output, making it one of the most efficient wood pellet boilers ever made.
With 12.3kW ~ 18.6kw going into the central heating and hot water, this is a powerful stove and yet the 62 kg internal pellet hopper gives it an exceptionally long-running period between fills.
Klover Wood Boiler Fire Place TKR 35
The Klover TKR 35 is extremely well made and the quality of the design, finish and material specification shines out.
The TKR will produce up to 17 kW of hot water and pass up to 11.5 kW of heat to the room at a very impressive 83% efficiency.
Suited for open-vented or pressurised systems, the TKR features Klover’s unique Sicuro Top safety system, which makes linking this stove into an existing heating configuration very straightforward.
There is also the option for a combi-coil, which can give instant domestic hot water when the stove is running.
Klover Wood Utility Boiler KL 29/40
The Utility Boiler 29 produces up to 28.8 kW output and, like its larger brother, it maximizes the heat from the flue gases as well as the flames, giving it an efficiency rating 83%.
The Utility Boiler 40 gives out up to 38.6 kW of heat, making it ideal for providing heating and hot water for large houses.
DETAILS:
Wood Boiler KL 29
Net Weight 290 Kg
Dimensions W x H x D 650 x 500 x 650 mm
Wood Boiler KL 40
Net Weight 305 Kg
Dimensions W x H x D 650 x 1500 x 650 mm
Delonghi Radel Steel Panel Radiator
Hydronic panel radiators are not only of high performance- elegance, superb finish, and design are an integral part of the completed product.
DeLonghi panel radiators are only made by using top quality techniques and materials.
The radiant steel panel guarantees high thermal efficiency and great reliability.
DETAILS:
Finish: high gloss white, unique finish both scratch and corrosion resistant
Colour: Standard white – RAL 9016
Measurements: Heights from 300 mm to 900 mm. Widths from 400 mm up to 3000 mm.
Available as single, compact, double, and triple panels.
LVI Panel Radiator – Yali Digital –
The Yali Digital offers superb flexibility in controlling temperature with a minimal visual display discreetly moulded onto the side panel. The control can be touch screen and connected to WiFi. The versatile touch screen control comes in many sizes and is able to be upgraded when new functions become available.
If a significant increase in temperature is needed, the radiator can be controlled to use both radiant and convective heat.
Delonghi Tubular Radiator
Tubular radiators can be used as an architectural feature of your home while combining looks and warmth in one superior product.
A key feature of the tubular radiators is the perfectly smooth lustrous finish without any traces of weld joints, allowing you to make a statement or blend with any interior decor.
Every DeLonghi radiator has a 10 year guarantee against design or manufacturing defects from the date of installation.
DETAILS:
Finish: High gloss white
Colour: Standard white- RAL 9016
Measurements: Available in 2, 3 , 4, 5 and 6 columns in various heights. Each section width 46 mm.
FACOT ALIGEL HC20 BIO, TANKS 5 KG
TThermovector antifreezing fluid with high heat exchange, long lasting. Ready-to-use product added with fluorescent liquid, leaks detector. Special for solar panels, tested against chemical stress according to GCF-CEG-FL-21-A-0 Regulation
FACOT FLIMAX 7.0
The ANTINEX + Thermakil chemical treatment is a scale remover, detergent for oxides, sludge and mud.
It protects installations and reduces the excessive formation of encrustations. It keeps lime scales and deposits in suspension in the plant.
FACOT ANTINEX BOTTLE (1 Litre)
The ANTINEX + Thermakil chemical treatment is a scale remover, detergent for oxides, sludge and mud.
It protects installations and reduces the excessive formation of encrustations. It keeps lime scales and deposits in suspension in the plant.
LVI Towel Warmer – Nila –
Nila towel warmer is simple to install, and consumes no more electricity than a light bulb.
Available in a chrome or white gloss finish, its rounded corners and rails create an impression of softness. The Nila R comes with a concealed or visible cable connector, giving it the flexibility to blend perfectly into your kitchen or bathroom. Connection points are available on the bottom left- or right-hand sides of the unit.
The Nila R comes with an adjustable temperature control so you can always find the ideal temperature.
DETAILS:
SMARTHEAT SOLAR: FLAT ROOF FRAME
DETAILS:
SH-FRF Upright aluminium frame for a flat roof (one set per solar tube collectors)
Solar tube collectors in the image are not included
SMARTHEAT: DUAL HELICAL 25M & 15M ROLL
3/4” & 1″ AISI 304 Dual Tube, Insulation. Sensor line & Braid Slip
DETAILS:
SHSOLAR25R3/4 25m Roll Tube
OD: 18.00 mm, ID: 13.90 mm, 0.3T, Pitch: 5.00 mm
SHSOLAR15R3/4 15m Roll Tube
OD: 18.00 mm, ID: 13.90 mm, 0.3T, Pitch: 5.00 mm
SHSOLAR25R1 25m Roll Tube
OD: 25.60 mm, ID: 21.10 mm, 0.3T, Pitch: 5.56 mm
SHSOLAR15R1 15m Roll Tube
OD: 25.60 mm, ID: 21.10 mm, 0.3T, Pitch: 5.56 mm
IVAR: PROBE HOLDER
Probe holder with shut off valve
DETAILS:
506031 22 mm x 22 mm
IVAR: FLOW METER
Flow meter with by-pass for high flow rates available for Solar
DETAILS:
FLB70 1”1/4 DN 32
IVAR: SAFETY VALVE
Safety valves for solar applications
DETAILS:
5702323 1/2” M x 1/2” F, 3 Bar
MICOE SMARTHEAT SOLAR: COLLECTOR PACKAGE
Evacuated Tubes with Manifold & Flat Frame. Size 0.433 m³, Efficiency 71.3% (Aperture Area).
DETAILS:
TZ58/1800-30R5 30 Evacuated Tubes. Tube: 58 mm/1.8 m
Manifold
Flat Frame (Dimensions L2010 x W2420 x H189 mm)
Net Weight 122 Kg
IVAR: VARIMIX EXPANSION TANK
Expansion tank for VARIMIX system 18 Litre
DETAILS:
180006 VARIMIX 18 Litre system
HIDEW: RSO HYDRONIC DEHUMIDIFIER
Horizontal duct dehumidifiers for drop ceiling are designed for civil,
residential and commercial environments with high latent load that require
24 hrs/day operation.These are particularly suitable for buildings cooled by
radiant system, such as flooring, wall or ceiling.
HIDEW: POOL DEHUMIDIFIER
State of the art Dehumidifiers ideal for all size pools
DDS series dehumidifiers with advanced control are completely autonomous and are conceived for wall-mounted installation in
small private swimming pools.
ZETCO: VALVE KIT
suitable for Domestic Hot Water Boiler (21E, 26E, 32, 32Q, 32C)
DETAILS:
6310001 Water 20mm Press-fit and Gas 20mm Press-fit
BOSCH: HORIZONTAL WALL TERMINAL
Horizontal Wall Terminal, PP & AL, 100mm diameter
DETAILS:
MG87930 Wall Terminal, PP & AL,100mm diameter
BOSCH: 5000W ACCESSORIES
Outdoor Installing Casing
DETAILS:
BOC5000W Outdoor Installing Casing
BOSCH: WORCESTER GB 162
A natural gas system available in 65Kw and 100Kw
DETAILS:
774690822
87470250
SANDEN: HEAT PUMP UNIT
Individual Heat Pump Unit. Can be up to 4 metres away from the tank.
DETAILS:
GAU-A45HPFT Power Input. 1.0 kW. Ambient Air Operating
Temperature -10 ºC to + 43 ºC. 38 dB. COP (Heating
Efficiency) 4.5^. 1/2″ BSP, 12.7 mm. Weight 56 Kg
50 Litre Header Tank
Details
SHHEADER50L 50 litre Header Tank for wet back.
8 Litre Header Tank
Details
SHHEADER8L E-20/2mm
SMARTHEAT: THERMAL BUFFER TANK
Capacity 100 Litre. Electric element 3 Kw. Internal tank material 1.2 mm. Stainless steel 304
Height 1035 mm. Diameter 470 mm. Weight empty 26 Kg
Weight approx full 126 Kg. Tank insulation polyurethane insulation 8 mm.
Outer tank normal steel painted white 0.5 mm. Recommended maximum temp 90ºC
SMARTHEAT: SH-400 II AQUACELL THERMAL STAINLESS STEEL
HEAT EXCHANGER STORAGE TANK
Use for underfloor heating, solar, domestic hot water capacity 400 Litre
4 electrical elements. 2 Coils. Material internal 1.2 mm, inner tank stainless steel 304
Height 1810 mm, diameter 650 mm. Weight empty 55 Kg, weight approx full 455 Kg
Tank insulation polyurethane insulation 50 mm, wet back max temp 90ºC.
SMARTHEAT: SH-600 II AQUACELL THERMAL STAINLESS STEEL
HEAT EXCHANGER STORAGE TANK
Used for underfloor heating, solar, domestic hot water capacity 600 Litre
Material Internal 1.2 mm. Inner tank stainless steel 304, height 1873 mm, diameter 760 mm
Weight empty 121 Kg, weight approx full 721 Kg
Tank insulation polyurethane insulation 80 mm, wet back max temp 90ºC
SMARTHEAT: SH-1000 II THERMAL STAINLESS STEEL HEAT EXCHANGER STORAGE TANK
Used for underfloor heating, solar, domestic hot water capacity 1000 Litre
Material internal 2.0 mm. Inner tank stainless steel 304, coil type Helical Corrigated ANSI316L
Height 2541 mm, diameter 860 mm, weight empty 155 Kg
Weight approx full 1155 Kg. Tank insulation PU sponge insulation jacket 80 mm
SH-1000 II
Details
SH-1000 II
IVAR: VARIMIX 3-WAY MIXER LOW TEMP
Motorisable mixer kit 1-1/4-” W – KV8
Details
550626 LT Varimix motorisable mixer kit
IVAR: RADIATOR ADAPTOR
12.7mm Copper and soft steel pipe
Details
509150N 12.7mm Copper Pipe
[IVAR] Lockshield
Straight thermostatic valve with male connection
Details
520077RC EUROK x 1/2“ M O-ring
[IVAR] Lockshield
90°Degree lockshield heavy series with male connection
Details
520079RC EUROK x 1/2“ M O-ring
SIEMEN: ELECTROMOTORIC ACTUATORS
Ideal 3-position control in heating systems, chilled ceiling and terminal units,
radiators, mini combi valves and small valves.
Details
SSA31 Operating Voltage 230V 3-Position Control signal.
1.5m Cable None Modulating system.
SSA61 Operating voltage AC/DC 240V DC Control signal.
1.5 m Cable Modulating system.
IVAR: CHRONOTHERMOSTAT
Internal thermostat auto with 4 adjustments. Range : +5ºC/ +35ºC
Timed thermostat with 4 adjustable time slots.
Details
WLCT2-19 Internal thermostat with 4 adjustments
SMARTHEAT: HYDRONIC HEATING WIRING CENTRE
Waterline heating system has been developed to provide a temperature.
Control system for room heating/cooling, integrating the switching of primary
heating sources with the control of water temp and mixing device.
This ensures the best possible comfort conditions and also reduces energy consumption.
Power Source 100-240VAC 50/60HZ, Mx Relay contact 250VAC 10A,
Operation Temp: -20ºC ~ 60ºC ,Storage Temp: -20ºC ~ 70ºC.
Details
SH209 100- 240 VAC, 50/60HZ
IVAR: LAGO CONTROLLER 0321
Climate control unit with external sensor, delivery sensor and boiler sensor.
Details
99797311 8 Outputs for electro thermostatic
SMARTHEAT: FAN COIL THERMOSTAT
Heat/cool, 3-speed fan, 4-pipe fan coil unit, dimensions:115 x 90 x 28 mm
Electrical rating 100-240VAC, 50/60HZ. Fan relay amps inductive 5(3)A heat/cool
Relay amps inductive 1(0.5)A, set point temp range 5ºC to 35ºC.
Colour white.
Details
SH908FC T-4B 4 Pipe fan coil unit heating and cooling
SOLASTAT: SOLASMART PLUS- S1R
SolaSmart Plus-S1R-2SR. Control range- 40 ~ +299°C.
Operating temperature 0~60°C- 240 Vac +/- 10% 50 to 60 Hz.
IVAR: 6 OUTPUTS CLIMATIC ADJUSTMENT SYSTEM
6 outputs for electro thermostatic actuator.
Details
WLM2-1AO 6 Outputs for electro thermostatic
SIEMENS: CABLE TEMPERATURE SENSOR
The sensor is used as: (1) return air temperature sensor
(2) changeover sensor. Cable Temperature sensor with ferrules.
Details
QAH11.1 Cable temperature sensor
SIEMENS: ROOM TEMPERATURE SENSOR
HVAC plants to acquire the room temperature.
For use with controller whose sensor signal input are not
galvanically separated from the AC 230V mains.
Details
QAA32 Room temperature sensor
SIEMENS: AUTOMATIC THERMOSTAT
Room Thermostat with Auto Timer, Option External Input.
The Thermostat allows you to set the room temperature at a time you want.
Control, 2-position control with on/off output for heating.
Auto time Switch Comfort, Economy, Auto timer and Protection mode.
Adjustable commissioning and control parameters.
TIA: UNDERFLOOR HEATING CLIP RAIL WITH INTEGRATED
BARBER HOOKS
Underfloor clip rail with integrated barber hooks
Details
F-061204 1ea x 1m Integrated barber hooks 14-22mm – pin24mm
TIA: CALIBRATOR 16 – 32 MM
Allows easy installation of pipe fittings. Material, Plastic
Details
F-693754 16mm Dia. 100 x 90 x 20mm
F-693761 20mm Dia. 110 x 100 x 30mm
F-693778 25mm Dia. 110 x 110 x 40mm
F-693785 32mm Dia. 110 x 110 x 50mm
Calibrating and chamfering PEX / AL / PEX Pipes
MAINCOR: UNIVERSAL BEVELLING TOOL
Universal bevelling tool
Details
60953212 Ø Sizes 16/20/25
TIA: PIPE CUTTER 3-42MM
Details
G-697424 Pipe cutter 3 -42mm
TIA: TACKER GUN & BAG
Details
F-694256 TIA: Tacker gun + bag
TIA: PIPE DECOILER 480M + BAG
Details
F-061144 Pipe decoiler 480m + bag
IVAR: THERMOSTATIC HEAD
With incorporated control and immersion remote sensor
Details
501175U Size m30x1.5- Range 20-60ºC-2m
IVAR: SINGLE CIRCUIT MIXING UNIT
Underfloor heating single circuit mixing unit without pump.
Blender range: 35-65 °C Thermostat setting: approx. 40 °C /
Differential: 8-10 K with respect to closure temp. Max operating static
pressure : 10bar / 145psi. Max primary fluid temperature : 90 °C
Details
506717WP 10bar/145psi. Max primary fluid temp: 90°C
IVAR: MULTIFLOOR MIXING UNIT
Multifloor underfloor heating mixing unit without pump. The system
can be completed with IVAR manifolds featuring balancing and con
control valves on each radiant distribution circuit, and with horizontal- or
vertical-structure manifold kits to supply high-temperature heating bodies
upstream of the mixing zone.
Details
500414 Max working temperature (except pumps) 90 °C
Thermostatic mixer adjustment: max 53°C 10 bar
IVAR: COMBIMIX REGULATOR UNIT FOR RADIANT SYSTEMS
Combimix Regulator with Thermostatic Head and Bypass Fixed setting
Details
500454 COMBIMIX regulator unit for radiant systems
with/without 130/180 mm standard 3-speed pump.
IVAR: STAINLESS STEEL MANIFOLD
Stainless Steel manifold kit with auto airvent, flow meters / adjusters
FLUXER (0-5L/min), return manifold with protection cap for thermostatic
insert, brakets and EUROK connections.
Details
503202AIVX1 1 ” X EUROK 2 WAYS
503203AIVX1 1 ” X EUROK 3 WAYS
503204AIVX1 1 ” X EUROK 4 WAYS
503205AIVX1 1 ” X EUROK 5 WAYS
503206AIVX1 1 ” X EUROK 6 WAYS
503207AIVX1 1 ” X EUROK 7 WAYS
503208AIVX1 1 ” X EUROK 8 WAYS
503209AIVX1 1 ” X EUROK 9 WAYS
503210AIVX1 1 ” X EUROK 10 WAYS
503211AIVX1 1 ” X EUROK 11 WAYS
503212AIVX1 1 ” X EUROK 12 WAYS
503213AIVX1 1 ” X EUROK 13 WAYS
IVAR: MODULAR MANIFOLD
Varimix Modular Manifold
Details
550630 G 1 1/4” M – Q Max 4.500 l/h
IVAR: VARIMIX 11 HIGH TEMP KIT
Pump with and without dif by -Pass valve 1”1/4
Details
550610P: Varimix 11 high temp kit without dif bypass
550611P: 1”/14 with bypass valve
[WILO] TOP Z CIRCULATION PUMP
Glandless Circulation Pump Brass Body Manual power adjustable through
2-speed selector switch, inbuit motor thermal protection.
Unique self venting design to ensure long-term operation.
All units supplied with bronze housing.
Details
2127302 25/10 EM-AU, 1” Manual adjustment, 3speed
2127303 30/10 EM-AU, 1”1/4 Manual adjustment, 3speed
WILO: STAR Z CIRCULATION PUMP
Glandless Circulation Pump Brass Body Star-Z 15-TT features integrated
timer and thermostat plus isolation valve and non-return valve pre-mounted
to pump, Star-Z 20/7-3, features sanitary stainless steel pump housing
Remaining units supplied with bronze housing.
Details
4110919 1/2” Circulation pump, Union 15/B needed
4184746 3/4” Circulation pump, Union 20/B needed
4047573 1” Circulation pump, Union 25/B needed
AVG: HIGH PRESSURE TEMPERATURE RELIEF VALVE
Ideal for installation with high-pressure storage water heaters.
Suits inlet pressures up to 2000Kpa, operates at up to 80ºC.
Details
PLV20/600F Pressure Setting 600kPa
PLV20/500F Pressure Setting 500kPa
PLV20/350F Pressure Setting 350kPa
AVG: 20 MM TEMPERING VALVE ASSEMBLY
Suitable for strong water system cold water supply temp: 5ºC -25ºC, hot
water supply temp: 65ºC – 85ºC . Flow Rate. 4Ltr/min
Details
TVA20C-1 20mm Tempering Valve
TVA15C-1 15mm Tempering Valve
AVG: 20 MM PRESSURE REDUCING VALVE
Non Return Isolation Pressure reduction valve Combination Adjustable
Range 150-600 kPa, Factory set at 500kPa, Max Inlet Pressure
1600kPa, Max working Temp: 80ºC, Flow rate K @ 700 kPa.
Details
PRV20 20mm 3/4”
AVG: 20 MM TEMPERING VALVE ASSEMBLY
Suitable for Solar +instantaneous hot water system ,cold water supply
temp: 5ºC -25ºC, Hot water supply temp: 65ºC – 99ºC
Adjustable outlet temp range 40ºC – 50ºC. Flow rate Min. 4Ltr/min.
Details
TVA20CHP-1 20mm Tempering Valve c/w. With Insulation boot
TVA15CHP-1 15mm Tempering Valve c/w. With Insulation boot
AVG: Pressure Temperature Relief Valve
The Pressure and Temperature Relief valve (PTR) is designed to relive
the increase in pressure caused by water expansion during the normal
heating cycle.
Details
PRT20/1000 20mm 3/4” P&T Relief Valve
STIEBEL ELTRON: ENERGY EFFICIENT HEAT PUMP
Energy Efficient Heat Pump for domestic hot water
Details
WWK 302 302L, 550W, 10A
WWK 302H 302L, 550W, 10A, Smart Element
WWK 222 220L, 550W, 10A
WWK 222H 220L, 550W, 10A, Smart Element
The Screamer is a warning device that will immediately warn you in the event of any damage or fault.
SMARTHEAT SOLAR COLLECTOR PACKAGE
30 Evacuated Tubes. Tube: 58mm/1.8m with Manifold and Flat Frame (Dimensions L2010 x W2420 x H189mm).
Unique SmartHeat Micoe Solar Collector Package with 30 Evacuated Tubes with Manifold and Flat Frame. Size 0.433m³, efficiency 71.3% (Aperture Area).
Frame (Dimensions L2010 x W2420 x H189mm).
Net Weight 122kg
SmartHeat and Micoe Solar have put together a complete solar hot water system comprising of, 30 Collectors the Manifold. 315L Enamel Vitreous Tank. Electrical Element. Wilo Circulation Pump. Sensors and Controller and with a Flat Frame.
Comprising of.
30 Tube Collector Panel
315 Litre Vitreous Enamel tank with a back up electrical element
2 x Sensor wells. 2 x Brass T’s. 2 x Pump unions
1 x Wilo 15/6 circulation pump
1 x Solasmart Plus Controller
Comes with flat frame.
All upright frames for flat roofs are an extra and not included in the packages.
DETAILS:
TZ58/1800-30R5 30 Evacuated Tubes. Tube: 58 mm/1.8 m
Manifold
Flat Frame (Dimensions L 2010 x W 2420 x H 189 mm)
Net Weight 122 kg
60/100mm horizontal telescopic flue kit L 350mm-570mm. Please order each element individually and add to your cart.
60/100mm horizontal telescopic flue kit L 350mm-570mm. Please order each element individually and add to your cart.
Sizes *
6/100mm Horizontal Telescopic Flue Kit L 350mm -570mm
80/125mm Horizontal Flue Kit L1200mm
ACCESSORIES *
60/100mm Extention Flue Kit L 220mm
60/100mm High Level Horizontal Flue Adaptor
80/125mm High Level Horizontal Flue Adaptor
60/100mm Extention Flue Kit L 960mm
60/100mm 45 Degree Elbow(2unit)
60/100mm 90 Degree Elbow
60/100mm Support Bracket Kit
Installation
Flue kits for the Bosch 5000 W Range. 60/100mm horizontal telescopic flue kit L 350mm-570mm. Please order each element as required individually.
If you require further information on the various flue kit sizes and accessories please contact Hydrosupply.com.au
30Kw heat output, available in NG and LPG. Efficient and compact.
Details
Options(Size *)
30Kw Heat Output. NG
30Kw Heat Output. LPG
Bosch setting thestandard in efficient domestic hydronic heating the WBN6000-30NG. 30Kw heat output, Excellent efficiency, Compact, modern design. Quiet operation User friendly controllers,Available in NG and LPG, External Installation.
5000W Condensing Hydronic Heating Boilers – 18Kw – 30Kw and 37Kw
Details
ZSB 182A *
5000 W 18 Kw Cond NG/LPG
5000 W 30 Kw Cond NG/LPG
5000 W 37 Kw Combi NG/LPG
The range available in 5000W Condensing Hydronic Heating Boiler – 18Kw- 30Kw-37Kw
The Bosch Condensing 5000W System Boilers 18Kw and 30Kw, take care of heating home
easy to install hydronic heating solution.Many of the components of the system,
Such as Expantion vessel, are built into the Bosch Hydronic heating boiler itself,making it.
quick and easy to install.
The Bosch Condensing 5000W 37Kw Boiler
The Bosch Condensing 5000W 37Kw Combination Boiler is a gas condensing boiler that is capable of
providing both central heating and domestic hot water. Combining two appliances, a Bosch ‘Combi’ boiler
uses high-efficiency condensing technology for both heating and domestic hot water.
SH-500 II STAINLESS STEEL THERMAL HEAT EXCHANGE STORAGE TANK.
Australian Design – large storage capacity.
Multiple heat source inputs.
Equal distribution of hot water temperature with cylindrical casing.
Gas booster incorporates 5 star flow water heater, producing 26/32 L/min.
None adjustable thermostat
Solar Controller / 240VAC 50Hz. Three Sensor( Lower, Tank, and Roof sensors) Two out for Solar pump and HWC Boosting pump(240VAC).None adjustable thermostat
Solar Pool controller 240v.
Pool Controller. Two sensors (Pool & Roof). One output (240VAC) for pool pump LED display c/w 8 status lights. High Quality,efficiency, reliability and +/- 1C Accuracy Enclosure and cable UV resistant, Water resistant, rear cable entry option Rear Cable Entry Option.2HP(1500W) Relay Standard.
Hot Water Controller. Adjustable Value Range 240v.
Hot water sensor one output for circulation automatic HWC element controller. Save power, save money digital LED display c/w 8 status lights , bio-safe function reliability and +/-1C accuracy.
Stainless steel, water resistant, temp sensor enclosure and cables UV resistant. Water resistant and rear cable entry options.
SMARTHEAT ELECTROTHERMAL HEAD
Electrothermal actuator open and close valve.
Voltage AC 230V 110V 24V.
Power Consumption: >2W, stroke: 3 mm, force: 130 F 80N.
Ambient temp: -10 + 60ºC, ambient humidity 90%, protective housing: IP45, valve interface: M30*1.5
Straight Male Connector. 1/2” x 20. – 1 ¼” x 40
Size *
1/2” x 20
3/4” x 25
1” x 32
1 ¼” x 40
Suitable for use with low and high density polyethylene Pipes. Minium and Max Tempreatures -20C -110C. Nominal Pressure 25bar.
3-Piece Elbow With O-Ring. 1/2” Din 15. 50 bar / 725psi. – 1 ¼” Din 32. 30 bar /435psi
Size *
1/2” Din 15. 50bar/725psi
3/4 Din 20. 40bar/580psi
1” Din 25. 40bar/580psi
1 ¼” Din 32. 30bar/435psi
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. Body in brass or nickel-plated brass.
3-Piece Straight Connector With O-Ring – 1/2” Din 15. 50 bar / 725psi – 1 ¼” Din 32. 30 bar / 435psi
Size *
1/2” Din 15. 50bar/725psi
3/4 Din 20. 40bar/580psi
1” Din 25. 40bar/580psi
1 ¼” Din 32. 30bar/435psi
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. Body in brass or nickel-plated brass.
Straight Connector.1/2” Din 15. 50 bar / 725psi – 1 ¼” Din 32. 30 bar / 435psi
Size *
1/2” Din 15. 50bar/725psi
3/4 Din 20. 40bar/580ps
1” Din 25. 40bar/580psi
1 ¼” Din 32. 30bar/435psi
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. Body in brass or nickel-plated brass.
Blanking plug 16
Mainpress Joint unit nut female thread. 16 x ½” FT – 32 x 1 ¼” FT
Size *
16 x ½” FT
16 x ¾” FT
20x ½” FT
20 x ¾”FT
25 x 1” FT
32 x 1 ¼” FT
Mainpress Joint unit nut female thread. Mainpress Joint unit nut female thread Maincor Straight Press to Female Thread Connectors with a swivel nut are used to connect multilayer pipework to a wide variety of system components
Mainpress Coupling Reduced Fittings. 20 x 16 – 40 x 32
Size *
20 x 16
25 x 16
25 x 20
32 x 20
32 x 25
40 x 32
Mainpress Coupling Reduced Fittings. Maincor Straight Press coupling reducers are used where straight lengths in excess of 5m are required. By utilising the straight press fitting, multiple 5m lengths can be coupled together, giving the desired installation length.
Mainpress Coupling Fittings. 16 x 16 – 40 x 40
Size *
16 x 16
20 x 20
25 x 25
32 x 32
40 x 40
Mainpress Coupling Fittings. Maincor Straight Press coupling are used where straight lengths in excess of 5m are required. By utilising the straight press fitting, multiple 5m lengths can be coupled together, giving the desired installation length.
Mainpress Male Elbow Connector.16 x ½” FT – 32 x 1” FT
Size *
16 x ½” FT
20x ¾” FT
25 x 1” FT
32 x 1″ FT
Mainpress Male Elbow Connector. Maincor Press Male Elbow to male thread connectors are to be used when a 90º elbow is required when joining to a BSP connection.
Mainpress Male Elbow Connector.16 x ½” FT – 32 x 1” FT
Size *
16 x ½” FT
20x ¾” FT
25 x 1” FT
32 x 1″ FT
Mainpress Male Elbow Connector. Maincor Press Male Elbow to male thread connectors are to be used when a 90º elbow is required when joining to a BSP connection.
Tee Female Thread. 20 x 1/2”x 20. – 32 x 1” x 32
Size *
20 x 1/2”x 20
25 x 3/4” x 25
32 x 1” x 32
Mainpress Male Connector.16 x ½” MT – 40 x 1 ¼”MT
Size *
16 x ½” MT
20x ½” MT
20 x ¾”MT
25 x ¾” MT
25 x 1″ MT
32 x 1″ MT
32 x 1 ¼” MT
40 x 1 ¼”MT
Mainpress Male Connector. Maincor Straight Press to Male Connectors are used to connect multi-layer pipework to a wide variety of system components. The Male thread is a BSP connection and is also used in conjunction with plumbers fittings to achieve final connections
Mainpress Wall Elbow Female Thread.16 x ½” FT and 20 x ½” FT
Size *
16 x ½” FT
20 x ½” FT
Mainpress Wall Elbow Female Thread. Maincor press wall plate Elbows allow an outside tap or other similar connections to be piped in multilayer pipework and adapted to 1/2” or 3/4” Female thread.
Mainpress Tee Reducer. 20 x 16 x16 upwards
Size *
20 x 16 x16
20 x 16 x 20
25 x 16 x 25
25 x 20 x 20
25 x 20 x 25
32 x 16 x 32
32 x 25 x 25
32 x 20 x 20
32 x 25 x 32
40 x 20 x 40
40 x 25 x 40
40 x 32 x 40
Mainpress Tee Reducer.
Maincor Reducing Press Tees are used to branch off main distribution pipework, allowing effective distribution to multiple services.
Mainpress 90°Degree Elbow
Size *
16 x 16
20 x 20
25 x 25
32 x 32
40 x 40
Floor Insulation .14-17 Diameter. EPS 150. 1400x800x11mm and 30mm
Size *
14-17 Diameter. EPS 150. 1400x800x11mm
14-17 Diameter. EPS T 040. 400x800x30mm
System boards to surface heating are a products with acoustic insulation and high heat insulation characteristic.With EPS styrofoam 30 & 11mm, 1400mmx800mm.
Pipe bend supports available in 2 sizes 14-18mm and 20-22mm
Options
Pipe bend support 14-18mm
Pipe bend support 20-22mm
Clip rail 14-22mm with tape.
Self adhesive underfloor heating Clip rail 14-22mm with tape.
Heat diffusion plate.1m x 0,18m For 16mm pipe .Thickness: 0,4mm
Thickness: 0,4mm.(For pipe distance 200mm)
Heat diffusion aluminium double panel 1m x 0,39m.
Thickness: 0,45mm
For pipe 16mm (for pipe distance 200mm).
Tacker staples for underfloor heating pipe set ups. Available 40mmx300
E-20/2 mm (PE pipe) adapter
EK-16×2 mm Multi-layer Pipe
16/2mm (Multi -layer)
EK-16×1.5 mm PE PIPE
Cooling & Heating without pump and thermostatic head 20-60c
Hydraulic separator/pressure equalizer with temperature/pressure gauge and automatic air vent valve for VARIMIX system.
This solution gives the opportunity to manage multiple thermal areas with different characteristics as truly independent zones in a neat, rational space, thanks to its modular structure and outstanding installation flexibility.
Sizes G 1 1/4” – Q Max 4.500 l/h
2 Ball Valves + 1 Refilling valve + 1 Anti pollution valve + 1 Strainer
Easy valve train system made up of 2 Ball Valves + 1 Refilling valve + 1 Anti pollution valve + 1 Strainer
Nickel plated brass 20c – 180c
Options
3/8” Pressure 10 bar /145psi
1/2” Pressure 10 bar /145psi
Solar Air Vent Valve.
Body in nickel-plated brass.
Minimum and maximum working temperatures: -20°C, 180°C.
Nominal pressure: 10 bar.
Thread ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Thermastatic head with incorporated command and remote contact sensor. M30 x 1,5 – Range 20-60 °C – 2 m. Range of adjustment 20 – 60 C
Nickel plated brass max working temp 110c
Automatic Air Vent Check Valve.
Body nickel-plated brass.
Suitable for the use together with automatic air vent valves art 362 – 362R – 363 – 364 – 364R.
Maxi working temperature: 110°C.
Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Automatic Air Vent Nickel plated brass max working temp 110°C.
Body nickel-plated brass.
Float in polyethilenic resin. O-ring in NBR.
Maxi working temperature: 110°C.
MAX DISCHARGE PRESSURE: 6 bar.
Threads: SO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
3 Way axiel mixing valve DN32.
3 Way Thermostatic Axial Mixing Valve.
Thermostatic axial mixing valve for high flow capacity with female connection The 3-way axial mixing valve (DN 32) is designed to mix hot and cold water in systems with high flow with 13Kw valve.
Diaphragm Safety Relief Valve 1/2″ D15
Options
1/2″ DN 15, 3 Pressure
1/2″ DN 15, 6 Pressure
Diaphragm Safety Relief Valve.
Nickle Plated Brass ½” D15 pressure.
Stainless Steel Spring Available Settings 1.5-1.8-2.5-3-4-6 bar.
Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228]
3 x1 With lateral mixer 3rd range DN 25 15-60c. 1“ F x 1“ F x 1“ F – Kv = 2,7.
Thermostatic Mixing Valve.
The valves in this section are piston mixers controlled by an external thermostatic actuator, eqipped with a remote probe (T5011, T 5012, T 3011, T 3012) or motorized for modulating regulation by means of NRV 24, NRV 230, SRV 24 motors or TE3061 electrothermal actuator.
The only difference between MR 02 and MR 03 is the position of the ways (+; -; MIX) making easier their use in several situations. MR 01, instead, is specially constructed for specific use in mixing systems for radiant systems.
In these cases, its function is not precisely that of a mixer but substantially that of a 2-way thermostatic valve with open bypass on return from the radiant circuit.
The flow inlet in this bypass is adjusted by means of AC 662.
Pressure gauge bottom connection, 1/4” 0 – 10bar Pressure gauge.
Complying with ISPESL regulation. Diameter mm. 63.
Size of the connection: 1/4”. Scale: 0-10 bar.
Taper thread ISO 7/1 R (equivalent to DIN EN 10226-1 and BS EN 10226-1).
Brass Body. Washer in NBR, Stainless Steel Spring Sizes 3/8″ – 4″
Options
1/2” Din 15. 12 bar/174psi
3/4” Din 20. 12 bar/174psi
1” Din 25. 12 bar/174psi
1”1/4 Din 32. 10 bar/145psi
1”1/2 Din 40. 10 bar/145psi
2” Din 50. 10 bar/145psi
Check Valve. Body Brass. Plate polymer. Washer in NBR. Spring in stainless steel. Min –Max temperatures: 20°C – 60°C. Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228].
Suitable for domestic water services heating air conditioning.
In stall any position.
Thermometer and pressure gauge,back connection. ith bottom connection. 1/2” 0-4 Bar.Scale: 0°c -120° 63 mm diameter. Diameter mm.63. Size of the connection: 1/2”. Scale: 0°C-120°C, 0-4 bar. Taper thread ISO 7/1 R (equivalent to DIN EN 10226-1 and BS EN 10226-1).
Anti Pollution non return valve 3/4″ – L58mm. Anti-Pollution Non-return Valve with NF certification. The check valves are a anti polulution device that prevent the flow direction reversal and water contamination.
Pressure control and Refilling Valve 1/2” M x 1/2”F 0, 5- 4 bar with pressure gauge. 1/2” M x 1/2”F 0, 5- 4 bar with pressure gauge with Isolation filter and non- return check valve.
Strainer Brass Body. Sizes 1/4″ – 2″ Female/female threads.
Options
1/2” Strainer Brass Body. Din 15. 20 bar/290psi
3/4 Strainer Brass Body. Din 20. 20 bar/290psi
1” Strainer Brass Body. Din 25. 20 bar/290psi
1”1/4 Strainer Brass Body. Din 32. 20 bar/290psi
1”1/2 Strainer Brass Body. Din 40. 20 bar/290psi
2” Strainer Brass Body. Din 50. 20 bar/290psi
Ideal for Hydronic Heating & Cooling, HVAC systems. Female/Female threads,inspection plug.Body in nickel-plated brass. Minimum and maximum working temperatures -20ºC, 110ºC in absence of steam.
Filtration degree: ¼” through 2” 500µm; 2”, ½”,3”,4” 800µm
Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228] Suitable for domestic water services heating air conditioning.
In stall any position.
Size *
1/2” Ball valve nickel plated Din 15. 5 bar/72.5psi
3/4” Ball valve nickel plated Din 20. 5 bar/72.5psi
Gas Ball Valve Full Flow.
Female/Female or Male/Female threads.
Body in nickel-plated brass. Minimum and maximum working temperature: 20ºC, 60ºC.T handle in aluminium. Female threads ISO7/1 Rp parallel [Equivalent to DIN EN 1026-1 & BS EN 10226-1]. Male threads ISO7/1 R Taper [Equivalent to DIN EN 1026-1 & BS EN 10226-1]
EN 332 Approved.
AGA: Approved.
Full Flow Ball Valve.Nickle plated comes in 4 sizes 1/2″ to 1 1/4″.
Options
1/2” Full flow valve nickel plated Din 15. 50 bar/725ps
3/4″ Full flow valve nickel plated Din 20. 40 bar/580psi
1” Full flow valve nickel plated Din 25. 40 bar/580psi
1”1/4 Full flow valve nickel plated Din 30. 30 bar/580psi
Full Flow Ball Valve.
Suitable for heating and HVAC Systems,Female/Female or Male/Female threads. Body in nickel-plated brass. Minimum and maximum working temperatures:-20°C, 150ºC in absence of steam.T handle in aluminium. Thread sizes DN 1/2 ” – 3/4″ – 1″ – 1¼”. Lever handle in steel T handle in Aluminium. Body nickel plated brass.
Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228]