Showing all 5 results

274 PE RT PIPE

[Maincor] PE-RT PIPE 300m roll

MAINCOR: PE-RT PIPE
PE-RT pipes in Coils 300m. Working Temp 70ºC, Max Temp 95ºC,
Max operating pressure at 70ºC – 6 bar. 5 Layer technology the oxygen
barrier is protected from mechanical damage.

Details
5016003430 16×2 PE-RT Pipes 300m Coil

Composite Pipe Preinsulated Pert 10.016.204

[Maincor] COMPOSITE PIPE PREINSULATED

MAINCOR: COMPOSITE PIPE PREINSULATED
Pert Preinsulated Pipes[25m-50m Coil lengths]

Details
10016209  16×2.0 .9mm Pre insulated Pipes [Comes – 50m Coil]
10020229  20×2.25.9mm Pre insulated Pipes [Comes -50m Coil]
10025259  25×2.5.9mm Pre insulated Pipes [Comes – 50m Coil]
100323013  32×3.0.13mm Pre insulated Pipes [Comes – 25m Coil]

MULTIECO 74505 1

[Aquatehnik] MULTI-CALOR PIPE 16mm rolls

Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE, PE-X + Al + PE-X, PN 10 – 95° C, in rolls

MULTI-CALOR PIPE
The pipe used in the multi-calor system is made by integrating
different materials, resulting in the terminology “multi-layer”.
The polymer of the internal/eternal layer is crosslinked
polyethylene (PE-X, see table of values and features). This
produces pipe with very good performance with high
temperature fluids under pressure and leaves the
characteristics of potable water unchanged. During the
production process, the external cover of the pipe (PE-X) is
combined with thin aluminium alloy layers, welded lengthwise –
by laser beam plasma – and then combined with a special
adhesive to make the materials bond perfectly. The result is
that the metal (Al) is covered by a PE-X layer, protecting it from
corrosion. All the process stages are checked by computerised
quality control ensuring every batch meets the appropriate
standards.

Application fields
Ideal for sanitary systems, heating and cooling industrial plants, for the conveyance of different fluids, compressed air, noble gas and drinking or not-drinking water.

Advantages

  • malleability and ductility to manual processing
  • great resistance to high working temperatures and pressures
  • chemical safety and stability to the fluids for human consumption
  • higher flowing and less pressure drop
  • cheap installation and transportation to the working seat
  • impermeability to oxygen

Sizes

  • 74004 16 mm
  • 74008 20 mm
  • 74010 26 mm
  • 74012 32 mm

More About Aquatechnik Pipes

MULTICALOR ISOLINE RED 300x300

[Aquatehnik] MULTI-CALOR PIPE ISOLINE RED rolls

Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE ISOLINE, PE-X + Al + PE-X, PN 10 – 95° C, with thermal insulation λ 0,040 in RED rolls

MULTI-CALOR PIPE
The pipe used in the multi-calor system is made by integrating
different materials, resulting in the terminology “multi-layer”.
The polymer of the internal/eternal layer is crosslinked
polyethylene (PE-X, see table of values and features). This
produces pipe with very good performance with high
temperature fluids under pressure and leaves the
characteristics of potable water unchanged. During the
production process, the external cover of the pipe (PE-X) is
combined with thin aluminium alloy layers, welded lengthwise –
by laser beam plasma – and then combined with a special
adhesive to make the materials bond perfectly. The result is
that the metal (Al) is covered by a PE-X layer, protecting it from
corrosion. All the process stages are checked by computerised
quality control ensuring every batch meets the appropriate
standards.

Sizes

  • 74033R 16 mm
  • 74038R 20 mm
  • 74041R 26 mm
  • 74043R 32 mm

More About Aquatechnik Pipes

MULTICALOR ISOLINE BLUE 1

[Aquatehnik] MULTI-CALOR PIPE ISOLINE BLUE rolls

Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE ISOLINE, PE-X + Al + PE-X, PN 10 – 95° C, with thermal insulation λ 0,040 increased thickness, in BLUE rolls.

MULTI-CALOR PIPE

The pipe used in the multi-calor system is made by integrating
different materials, resulting in the terminology “multi-layer”.
The polymer of the internal/eternal layer is crosslinked
polyethylene (PE-X, see table of values and features). This
produces pipe with very good performance with high
temperature fluids under pressure and leaves the
characteristics of potable water unchanged. During the
production process, the external cover of the pipe (PE-X) is
combined with thin aluminium alloy layers, welded lengthwise –
by laser beam plasma – and then combined with a special
adhesive to make the materials bond perfectly. The result is
that the metal (Al) is covered by a PE-X layer, protecting it from
corrosion. All the process stages are checked by computerised
quality control ensuring every batch meets the appropriate
standards.

Details

  • 74004 16 mm
  • 74008 20 mm
  • 74010 26 mm
  • 74012 32 mm

More About Aquatechnik Pipes