fill and flushing valve

Fill and Flush Valve

Key Features

  • Combination Functionality: This valve integrates two ball isolation valves and one ‘T’ port diverting ball valve. This combination allows for easy filling and flushing of the system with cleaning chemicals or water treatment solutions.
  • Versatile Fittings: Available with 25mm compression fitting
  • Included Accessories: Comes with hose outlet fittings, cover caps, and straps for straightforward installation.
  • Certified Installation Recommended: We recommend that the installation be carried out by an approved installer to ensure optimal performance and safety.
  • Water Softener Compatibility: Particularly in hard water areas, it’s advised to use a water softener such as ActivFlo or ActivFlo Lite to reduce the risk of calcium deposits forming within the system.

 

Flushing pump 40L

Descaling(Flushing) Pump Station – 40L

Features:

  • Removal of corrosion residues, sludge and scale.
  • Clear noise and cycle failures
  • Remove boiler scale and extend the life of the boiler
  • Improve radiator performance and ensure heat output
  • Large capacity, flushing more area
  • Equipped with 4 wheel, mobile cleaning is more convenient

Technical Parameter:

  • Working Pressure : Max 2.0 bar
  • Working Temperature : 50 °C
  • Motor Power : HP0.5
  • Power supply : 230V-50Hz
  • Flow Rate : 69L / min
  • Capacity : 40L
  • Applicable Medium : water
flushing pump

Descaling(Flushing) Pump Station – 17L

Features:

  • Removal of corrosion residues, sludge and scale.
  • Clear noise and cycle failures
  • Remove boiler scale and extend the life of the boiler
  • Improve radiator performance and ensure heat output
  • Quick cleaning

Technical Parameter:

  • Working Pressure : Max 1.2 bar
  • Working Temperature : 50 °C
  • Motor Power : HP0.5
  • Power supply : 230V-50Hz
  • Flow Rate : 33L / min
  • Capacity : 17L
  • Applicable Medium : water
CIMM Expansion Tank 18L

CIMM Expansion Tank 12L

  • Rubber diaphragm
  • Pressure gauge for vessels ≥ 750 liters
  • 100% made in Italy
  • Complies with PED 2014/68/UE and EN 13831
  • International quality certification
  • High customization
  • Epoxy powder coating for protection and aesthetics
  • Rigorous quality controls throughout production
CIMM Expansion Tank 18L

CIMM Expansion Tank 18L

  • Rubber diaphragm
  • Pressure gauge for vessels ≥ 750 liters
  • 100% made in Italy
  • Complies with PED 2014/68/UE and EN 13831
  • International quality certification
  • High customization
  • Epoxy powder coating for protection and aesthetics
  • Rigorous quality controls throughout production
CIMM Expansion Tank 24L

CIMM Expansion Tank 24L

  • Rubber diaphragm
  • Pressure gauge for vessels ≥ 750 liters
  • 100% made in Italy
  • Complies with PED 2014/68/UE and EN 13831
  • International quality certification
  • High customization
  • Epoxy powder coating for protection and aesthetics
  • Rigorous quality controls throughout production
Hydorsupply-CIMM Expansion Tank 35L

CIMM Expansion Tank 35L

  • Rubber diaphragm
  • Pressure gauge for vessels ≥ 750 liters
  • 100% made in Italy
  • Complies with PED 2014/68/UE and EN 13831
  • International quality certification
  • High customization
  • Epoxy powder coating for protection and aesthetics
  • Rigorous quality controls throughout production
XPS Foam insulation Boards

XPS Foam Tile Backer Insulation Board

• 100% waterproof. Made of HCFC free XPS foam.
• High-rigidity and durability.
• Creates a close bond to any tilling walls or floors.
• Available in various thickness.
1200 x 600 x 10mm
1200 x 600 x 20mm
1200 x 600 x 30mm
• Compatible with multiple substructures.
• Provides thermal insulation to reduce energy bills.
• Vapor retardant against mildew.
• Lightweight, easy to handle and cuts with utility knife.

smartheat-inverter-heat-pump

SmartHeat Inverter Heat Pump 9kW /12kW /15kW

Multi-Function Heat Pump / Heating & Cooling / DC Inverter Residential Type

  • 9kW / 12kW / 15kW / 18kW / 24kW / 28kW / 31kW available
  • Panasonic DC inverter compressor
  • 1Hz Stepless inverter
  • 3 min speed defrosting
  • 3dB ultra quiet
  • Up to 85% in energy saving
Smartheat heat pump

SmartHeat Inverter Heat Pump 18kW / 24kW / 31kW

Multi-Function Heat Pump / Heating & Cooling / DC Inverter Residential Type

  • 12kW / 18kW / 24kW / 28kW / 31kW available
  • Panasonic DC inverter compressor
  • 1Hz Stepless inverter
  • 3 min speed defrosting
  • 3dB ultra quiet
  • Up to 85% in energy saving
274 PE RT PIPE

[Maincor] PE-RT PIPE 300m roll

MAINCOR: PE-RT PIPE
PE-RT pipes in Coils 300m. Working Temp 70ºC, Max Temp 95ºC,
Max operating pressure at 70ºC – 6 bar. 5 Layer technology the oxygen
barrier is protected from mechanical damage.

Details
5016003430 16×2 PE-RT Pipes 300m Coil

Composite Pipe Preinsulated Pert 10.016.204

[Maincor] COMPOSITE PIPE PREINSULATED

MAINCOR: COMPOSITE PIPE PREINSULATED
Pert Preinsulated Pipes[25m-50m Coil lengths]

Details
10016209  16×2.0 .9mm Pre insulated Pipes [Comes – 50m Coil]
10020229  20×2.25.9mm Pre insulated Pipes [Comes -50m Coil]
10025259  25×2.5.9mm Pre insulated Pipes [Comes – 50m Coil]
100323013  32×3.0.13mm Pre insulated Pipes [Comes – 25m Coil]

smart arb img

LVI Towel Warmer – Smart Arborescence

Towel Warmer – Smart Arborescence –

Smart Arborescence allows you to benefit from a hot bath towel at all times while facilitating its access.
The fixed and smart tubes of Smart Arborescence play on the reversibility of colors to match your bathroom decor.

Detail:

  • Steel towel radiator
  • Works on electric circuit
  • Stylish and Modern
  • Duo color options – Smart Arborescence See Options
  • Extensive color options
  • Digital display
  • Optional blower unit to add additional heat
  • Treated protective finish – electrophoresis primer and epoxy-polymer powder coating
filmax8

FACOT FILMAX 8.0 1L / 5L

FACOT FLIMAX 8.0 

Special anti-corrosive anti-noise deoxygenating de-ironing additive allowing the elimination of the troublesome noise phenomena caused by excessive oxygenation of water and helping to maintain ferrous residues present in the system dispersed. It also exerts an antiscale complexing action and favours the formation of protective magnetite.

1L & 5L Available

sanden

Sanden 300L Eco Plus Hot Water Heat Pump System 300SAQA

Sanden Eco® Plus Hot Water Heat Pump System
The Sanden Eco® Plus Hot Water Heat Pump System is a highly energy-efficient replacement for your traditional electric hot water system. It absorbs heat from the air and transfers it to heat water, in a way that saves energy, saves money and reduces greenhouse gas emissions.

sanden

Sanden 315L Eco Plus Hot Water Heat Pump System 315SAQA

Sanden 315L Eco Plus Hot Water Heat Pump System 315SAQA
The Sanden Eco® Plus Hot Water Heat Pump System is a highly energy-efficient replacement for your traditional electric hot water system. It absorbs heat from the air and transfers it to heat water, in a way that saves energy, saves money and reduces greenhouse gas emissions.

sanden

Sanden 250L Eco Plus Hot Water Heat Pump System 250SAQA

Sanden 250L Eco Plus Hot Water Heat Pump System 250SAQA
The Sanden Eco® Plus Hot Water Heat Pump System is a highly energy-efficient replacement for your traditional electric hot water system. It absorbs heat from the air and transfers it to heat water, in a way that saves energy, saves money and reduces greenhouse gas emissions.

147 wwk302 302h

Stiebel Eltron 220L Heat Pump Hot Water Unit WWK222

  • German engineered
  • Designed for Australian conditions
  • Quiet operation with encased compressor design
  • Suitable for hard or soft water areas with maintenance free current impressed anode
  • Operates down to minus 5°C, ideal for cold climates
  • Unique roll bond condenser technology for optimal heat transfer
  • Active defrost function maintains operation in cold climates automatically
  • Single piece design for ease of installation
  • Ideal to operate with solar PV system
147 wwk302 302h

Stiebel Eltron 220L Heat Pump Hot Water Unit With Element WWK222H

  • German engineered
  • Designed for Australian conditions
  • Quiet operation with encased compressor design
  • Suitable for hard or soft water areas with maintenance free current impressed anode
  • Operates down to minus 5°C, ideal for cold climates
  • Unique roll bond condenser technology for optimal heat transfer
  • Active defrost function maintains operation in cold climates automatically
  • Single piece design for ease of installation
  • Ideal to operate with solar PV system
147 wwk302 302h

Stiebel Eltron 302L Heat Pump Hot Water Unit With Element WWK302H

  • German engineered
  • Designed for Australian conditions
  • Quiet operation with encased compressor design
  • Suitable for hard or soft water areas with maintenance free current impressed anode
  • Operates down to minus 5°C, ideal for cold climates
  • Unique roll bond condenser technology for optimal heat transfer
  • Active defrost function maintains operation in cold climates automatically
  • Single piece design for ease of installation
  • Ideal to operate with solar PV system
Immergas SE Internal

IMMERGAS SE 32kW Internal Boiler – LPG

IMMERGAS SE 32kW Internal Boiler – NG

Hunt Heating’s Immergas SE Internal boiler is a traditional hydronic system boiler for internal installation that can be hung on the wall.

This 32 kW output boiler is made in Italy with natural gas & LPG as the fuel source.

There is a guarantee of 3 years warranty on this product.

 

DETAILS: 

Height: 725 mm
Width: 520 mm
Depth: 250 mm
Empty appliance weight is 43 kg

 

Immergas Intec External

IMMERGAS SE 32kW External Boiler – LPG

IMMERGAS SE 32kW External Boiler – LPG

Immergas SE 32kW external boiler is a traditional hydronic system boiler for external installation that can be hung on the wall.

This 32 kW output boiler is made in Italy with LPG as the fuel source.

There is a guarantee of 3 years warranty on this product.

 

DETAILS: 

Height: 1000 mm
Width: 555 mm
Depth: 255 mm
Empty appliance weight is 45 kg
Immergas Intec Internal

IMMERGAS InTec 30kW Internal Boiler – NG

IMMERGAS InTec 30kW Internal Boiler – NG

Hunt Heating’s Immergas Intec 30kW Internal is a traditional hydronic system boiler for internal installation.

This 30kW output boiler is made in Italy with natural gas as the fuel source.

There is a guarantee of 3 years warranty on this product.


DETAILS: 

Height: 720 mm
Width: 440 mm
Depth: 300 mm

 

Immergas Intec Internal

IMMERGAS InTec 30kW Internal Boiler – LPG

IMMERGAS InTec 30kW Internal Boiler – LPG

Hunt Heating’s Immergas Intec 30kW Internal is a traditional hydronic system boiler for internal installation.

This 30kW output boiler is made in Italy with LPG as the fuel source.

There is a guarantee of 3 years warranty on this product.

DETAILS: 

Height: 720 mm
Width: 440 mm
Depth: 300 mm

 

Immergas Intec Internal

IMMERGAS InTec 12kW Internal Boiler – LPG

IMMERGAS InTec 12kW Internal Boiler – LPG

Hunt Heating’s Immergas Intec 12kW Internal is a traditional hydronic system boiler for internal installation.

This 12kW output boiler is made in Italy with LPG as the fuel source.

There is a guarantee of 3 years warranty on this product.

DETAILS: 

Height: 720 mm
Width: 440 mm
Depth: 300 mm

 

Immergas Intec External 1

IMMERGAS InTec 30kW External Boiler – NG

IMMERGAS InTec 30kW External Boiler – NG

Immergas Intec 30kW external is a traditional hydronic system boiler for external installation.

This 12kW output boiler is made in Italy with Natural Gas as the fuel source.

There is a guarantee of 3 years warranty on this product.

DETAILS: 

Height: 990 mm
Width: 470 mm
Depth: 310 mm

 

Immergas Intec External 1

IMMERGAS InTec 12kW External Boiler – NG

IMMERGAS InTec 12kW External Boiler – NG

Immergas Intec 12kW external is a traditional hydronic system boiler for external installation.

This 12kW output boiler is made in Italy with Natural Gas as the fuel source.

There is a guarantee of 3 years warranty on this product.


DETAILS: 

Height: 990 mm
Width: 470 mm
Depth: 310 mm

 

6

[Aquatehnik] THREADED MALE ELBOW (NO.19BP)

Aquatehnik : THREADED MALE ELBOW (NO.19BP)

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 30352 F1/2″ sm16-65mm
  • 30354 F1/2″ sm16-90mm
  • 30356 F1/2″ sm20-90mm

More About Aquatechnik Fittings

5

[Aquatechnik] BALL VALVE

Aquatechnik : BALL VALVE

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 21282 16mm
  • 21286 20mm
  • 21288 26mm
  • 21290 32mm

More About Aquatechnik Fittings

3

[Aquatechnik] BRACKETED THREADED ELBOW F WITH ALLOY THREAD (NO.15BP)

Aquatechnik : BRACKETED THREADED ELBOW F WITH ALLOY THREAD (NO.15BP)

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 20202 16mm F1/2″
  • 20206 20mm F1/2″

More About Aquatechnik Fittings

2

[Aquatechnik] THREADED ELBOW F WITH PPSU/ALLOY THREAD (NO.14)

Aquatechnik : THREADED ELBOW F WITH PPSU/ALLOY THREAD (NO.14)

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 20222 16mm F1/2″
  • 20226 20mm F1/2″
  • 20230 20mm F3/4″
  • 20232 26mm F3/4″
  • 20238 32mm F1″

More About Aquatechnik Fittings

1

[Aquatechnik] THREADED JOINT F WITH PPSU/ALLOY THREAD (NO.2)

Aquatechnik : THREADED JOINT F WITH PPSU/ALLOY THREAD (NO.2)

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 20062 16mm F1/2″
  • 20066 20mm F1/2″
  • 20070 20mm F3/4″
  • 20072 26mm F3/4″
  • 20073 26mm F1″
  • 20076 32mm F1″

More About Aquatechnik Fittings

No3

[Aquatechnik] THREADED JOINT M WITH ALLOY/PPSU THREAD (NO.3)

Aquatechnik : THREADED JOINT M WITH ALLOY/PPSU THREAD (NO.3)

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 20002 16mm M1/2″
  • 20006 20mm M1/2″
  • 20010 20mm M3/4″
  • 20012 26mm M3/4″
  • 20016 26mm M1″
  • 20016 32mm M1″

More About Aquatechnik Fittings

aqua eblow

[Aquatechnik] ELBOW 90° F/F

Aquatechnik : Elbow 90°

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 20382 16mm x 16 mm
  • 20382 20mm x 20mm
  • 20382 26mm x 26mm
  • 20382 32mm x 32mm

More About Aquatechnik Fittings

aqua tee

[Aquatechnik] Reduced Tee

Aquatechnik : REDUCED TEE safety-system

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 20717 20mm x 16 mm x 16mm
  • 20720 20mm x 16mm x 20mm
  • 20725 26mm x 16mm x 26mm
  • 20728 26mm x 20mm x 26mm
  • 20732 32mm x 16mm x 32mm
  • 20735 32mm x 20mm x 32mm
  • 20736 32mm x 26mm x 32mm

More About Aquatechnik Fittings

aqua tee

[Aquatechnik] Tee

Aquatechnik : TEE (No.24), safety-system

Aquatechnik SAFETY System
The lead free polymer safety fittings are the result of continuous technical innovation and research. This new range was designed and patented to reach the highest safety standards regarding the connection of in-wall multi-layer pipe installations.

The fittings are made from PPSU (polyphenylsulfone) which is a high performance polymer that has excellent impact and chemical resistance. It is commonly used in the fields of avionics due to its lightweight nature and flame-proof characteristics, and in medical applications such as human joint replacements due to its high impact strength and compatibility with human tissue. The material is also lead free, making it the safest choice for drinking water applications.

 

Sizes

  • 20662 16 mm
  • 20666 20 mm
  • 20668 26 mm
  • 20670 32 mm

More About Aquatechnik Fittings

MULTIECO 74505 1

[Aquatehnik] MULTI-CALOR PIPE 16mm rolls

Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE, PE-X + Al + PE-X, PN 10 – 95° C, in rolls

MULTI-CALOR PIPE
The pipe used in the multi-calor system is made by integrating
different materials, resulting in the terminology “multi-layer”.
The polymer of the internal/eternal layer is crosslinked
polyethylene (PE-X, see table of values and features). This
produces pipe with very good performance with high
temperature fluids under pressure and leaves the
characteristics of potable water unchanged. During the
production process, the external cover of the pipe (PE-X) is
combined with thin aluminium alloy layers, welded lengthwise –
by laser beam plasma – and then combined with a special
adhesive to make the materials bond perfectly. The result is
that the metal (Al) is covered by a PE-X layer, protecting it from
corrosion. All the process stages are checked by computerised
quality control ensuring every batch meets the appropriate
standards.

Application fields
Ideal for sanitary systems, heating and cooling industrial plants, for the conveyance of different fluids, compressed air, noble gas and drinking or not-drinking water.

Advantages

  • malleability and ductility to manual processing
  • great resistance to high working temperatures and pressures
  • chemical safety and stability to the fluids for human consumption
  • higher flowing and less pressure drop
  • cheap installation and transportation to the working seat
  • impermeability to oxygen

Sizes

  • 74004 16 mm
  • 74008 20 mm
  • 74010 26 mm
  • 74012 32 mm

More About Aquatechnik Pipes

MULTICALOR ISOLINE RED 300x300

[Aquatehnik] MULTI-CALOR PIPE ISOLINE RED rolls

Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE ISOLINE, PE-X + Al + PE-X, PN 10 – 95° C, with thermal insulation λ 0,040 in RED rolls

MULTI-CALOR PIPE
The pipe used in the multi-calor system is made by integrating
different materials, resulting in the terminology “multi-layer”.
The polymer of the internal/eternal layer is crosslinked
polyethylene (PE-X, see table of values and features). This
produces pipe with very good performance with high
temperature fluids under pressure and leaves the
characteristics of potable water unchanged. During the
production process, the external cover of the pipe (PE-X) is
combined with thin aluminium alloy layers, welded lengthwise –
by laser beam plasma – and then combined with a special
adhesive to make the materials bond perfectly. The result is
that the metal (Al) is covered by a PE-X layer, protecting it from
corrosion. All the process stages are checked by computerised
quality control ensuring every batch meets the appropriate
standards.

Sizes

  • 74033R 16 mm
  • 74038R 20 mm
  • 74041R 26 mm
  • 74043R 32 mm

More About Aquatechnik Pipes

MULTICALOR ISOLINE BLUE 1

[Aquatehnik] MULTI-CALOR PIPE ISOLINE BLUE rolls

Aquatehnik : MULTI-CALOR PIPE ISOLINE BLUE rolls
MULTI-CALOR PIPE ISOLINE, PE-X + Al + PE-X, PN 10 – 95° C, with thermal insulation λ 0,040 increased thickness, in BLUE rolls.

MULTI-CALOR PIPE

The pipe used in the multi-calor system is made by integrating
different materials, resulting in the terminology “multi-layer”.
The polymer of the internal/eternal layer is crosslinked
polyethylene (PE-X, see table of values and features). This
produces pipe with very good performance with high
temperature fluids under pressure and leaves the
characteristics of potable water unchanged. During the
production process, the external cover of the pipe (PE-X) is
combined with thin aluminium alloy layers, welded lengthwise –
by laser beam plasma – and then combined with a special
adhesive to make the materials bond perfectly. The result is
that the metal (Al) is covered by a PE-X layer, protecting it from
corrosion. All the process stages are checked by computerised
quality control ensuring every batch meets the appropriate
standards.

Details

  • 74004 16 mm
  • 74008 20 mm
  • 74010 26 mm
  • 74012 32 mm

More About Aquatechnik Pipes

muria towel warmers lvi outside 1 1024x1024

LVI Towel Warmer – Muria –

LVI Towel Warmer – Muria –

The Muria R towel warmers are perfect for confined spaces, as they are cleverly designed to turn 180-degrees on your wall. All models are available in a chrome or white gloss finish.
The Muria R has an adjustable thermostat so you can always find the right temperature.

Yaku parada

LVI Panel Radiator – Yali Parada –

LVI Panel Radiator – Yali Parada –

The Yali Yali offers superb flexibility in controlling temperature with a minimal visual display discreetly moulded onto the side panel. The control can be touch screen and connected to WiFi. The versatile touch screen control comes in many sizes and is able to be upgraded when new functions become available.

If a significant increase in temperature is needed, the radiator can be controlled to use both radiant and convective heat.

 

Immgergas Intec Combi external 1

IMMERGAS InTec 30kW External Combi Boiler – LPG

IMMERGAS InTec 30kW External Combi Boiler – LPG

Immergas Intec Combi External is a 30 kW condensing boiler, suited for external installation.

Combination boilers are ideal for heating a hydronic heating system whilst meeting all the properties of hot water requirements.

There is no need for a separate instantaneous hot water unit.

This 30 kW output boiler is made in Italy with natural gas & LPG as the fuel source.

There is a guarantee of 3 years warranty on this product.

DETAILS: 

Height: 990 mm
Width: 470 mm
Depth: 310 mm

 

Immergas Intec Combi Internal

IMMERGAS InTec 30kW INTERNAL Combi Boiler – LPG

IMMERGAS InTec 30kW INTERNAL Combi Boiler – LPG

Immergas Intec Combi Internal is a 30 kW condensing boiler, suited for internal installation.

Combination boilers are ideal for heating a hydronic heating system whilst meeting all the properties of hot water requirements.

There is no need for a separate instantaneous hot water unit.

This 30 kW output boiler is made in Italy with natural gas & LPG as the fuel source.

There is a guarantee of 3 years warranty on this product.

 

DETAILS: 

Height: 720 mm
Width: 440 mm
Depth: 300 mm

 

Immergas Intec External 1

IMMERGAS InTec 12kW External Boiler – LPG

IMMERGAS InTec 12kW External Boiler – LPG

Immergas Intec 12kW external is a traditional hydronic system boiler for external installation.

This 12kW output boiler is made in Italy with LPG as the fuel source.

There is a guarantee of 3 years warranty on this product.

DETAILS: 

Height: 990 mm
Width: 470 mm
Depth: 310 mm

 

Immergas Intec Internal

IMMERGAS InTec 12kW Internal Boiler – NG

IMMERGAS InTec 12kW Internal Boiler – NG

Hunt Heating’s Immergas Intec 12kW Internal is a traditional hydronic system boiler for internal installation.

This 12kW output boiler is made in Italy with natural gas as the fuel source.

There is a guarantee of 3 years warranty on this product.

DETAILS: 

Height: 720 mm
Width: 440 mm
Depth: 300 mm

 

Immergas Intec External

IMMERGAS SE 32kW External Boiler – NG

IMMERGAS SE 32kW External Boiler – NG

Immergas SE 32kW external boiler is a traditional hydronic system boiler for external installation that can be hung on the wall.

This 32 kW output boiler is made in Italy with natural gas as the fuel source.

There is a guarantee of 3 years warranty on this product.

 

DETAILS: 

Height: 1000 mm
Width: 555 mm
Depth: 255 mm
Empty appliance weight is 45 kg

 

Immergas SE Internal

IMMERGAS SE 32kW Internal Boiler – NG

IMMERGAS SE 32kW Internal Boiler – NG

Hunt Heating’s Immergas SE Internal boiler is a traditional hydronic system boiler for internal installation that can be hung on the wall.

This 32 kW output boiler is made in Italy with natural gas & LPG as the fuel source.

There is a guarantee of 3 years warranty on this product.

 

DETAILS: 

Height: 725 mm
Width: 520 mm
Depth: 250 mm
Empty appliance weight is 43 kg

 

dynamic 2500 img 1

WISELIVING Dynamic 2500 Boiler

WISELIVING Dynamic 2500 Boiler

The Dynamic 2500 delivers a hydronic heat output of 25 kWh.

It is a compact and economical option, this boiler is the smallest in the Dynamic Series range and is highly compact and will yield optimum results with frequent refuelling.

belvedere 5000

WISELIVING Belvedere 5000 Boiler

WISELIVING Belvedere 5000 Boiler

The Belvedere 5000 is a very feasible option for infloor slab heating as its high output, spacious firebox and high capacity water jacket meets the very initial temperature that is needed for in-slab heating.

Grand Cuisine

WISELIVING Thermalux Grand Cuisine Oven

WISELIVING Thermalux Grand Cuisine Oven

With four genuine ovens, an enormous main hotplate, a removable 250 mm drop scone hotplate (which can be easily removed), and two simmer plates, the Grand Cuisine is perfect for cooking, entertaining or for commercial application.

The ovens are self-cleaning and independently adjustable. The firebox is able to take timber up to 450 mm long.

 

The Grand Cuisine oven offers various hot water options including:

  • a 5 Kw stainless steel water jacket for domestic hot water up to 400 Litres
  • an 8 Kw stainless steel water jacket for larger domestic and some small hydronic projects
  • a 16 Kw boiler for larger hydronic heating projects up to 160 m2

 

The stove can reach up to bench height (900 mm) when installing on concrete floors with a plinth.

 

DETAILS: 

Heat Output: 5 Kw
 
Dimensions:
Height 810 mm
Width 1265 mm
Depth 670 mm
 
Clearances:
Rear 75 mm
LHS Side 100 mm
RHS Side 100 mm
SUPREME MKIII

WISELIVING Supreme III CD Hydronic Oven

WISELIVING Supreme III CD Hydronic Oven

The Supreme is very robust by nature, constructed from cast iron, heavy gauge steel and stainless steel components. All ovens are manufactured from thick plate steel, which extends the burning time. The Supreme series is designed and built to last up to 50 years or more.

 

In the Supreme series, there are different hydronic options including:

  • a 5 Kw water  jacket for domestic hot water heating
  • an 8 Kw water jacket for domestic and small hydronic supply
  • a massive 20 Kw for hydronic projects up to 200 m2 in the Supreme CD version

 

The Supreme CD (central heating cooker) has a heat output of 20 Kw- one of the highest heat outputs on the Australian market. The CD has an additional air control which provides for greater combustion. The Thermalux Supreme CD will run hydronic radiators or underfloor coil heating to heat up to a 200 m2   (20 sq) home.

 

DETAILS: 

Heat Output: 5 Kw  
Heating Capacity: Up to 200 m2  
 
Dimensions:
Height 810 mm
Width 840 mm
Depth 670 mm
 
Clearances:
Rear 75 mm
LHS below 50 mm
RHS above 100 mm
gourmet cooker red 1

WISELIVING Gourmet Cooker

WISELIVING Gourmet Cooker 

With an optional hot water jacket-wet back included, this gourmet cooker can altogether heat, cook and provide hot water to meet all your family’s needs.

The Gourmet is best placed in the lounge, dining or family room as a space heater and can also be sited in the kitchen as a cooker if desired. The unique venting system makes for easy control of oven temperatures for all cooking requirement

clarendon

WISELIVING Clarendon Thermalux Stove

WISELIVING Clarendon Thermalux Stove 

Thermalux Clarendon is an extremely fuel efficient, small to medium-sized wood cooker with options to suit new and refurbished locations for a wood stove.

sophel installation image

WISELIVING Sophel Hydronic Wood Boiler

WISELIVING Sophel Hydronic Boiler 

Wiseliving’s Sophel is a versatile hydronic boiler suitable for any type of  aesthetic space, whether it be rustic, old or modern.

A slow, elegant combustion exudes into the room while delivering a neutral distribution of warmth to each room in the home.

linea hydronic boiler

WISELIVING Linea Hydronic Boiler

WISELIVING Linea Hydronic Boiler on Legs

The Linea is a compact glass-fronted hydronic heating boiler, delivering 20 kW of hydronic heat to provide comfortable winter warmth throughout your home, and even larger areas in new homes with their significantly improved insulation qualities.

Although the Linea delivers its heat through hydronics, either by radiators, convector units or underfloor coils, the glass door is what gives Linea the appearance of a  conventional, solidly constructed combustion heater.

1450351301 productsroe rve

Hidew ROE/RVE Heat Recovery Unit

Hidew ROE/RVE Heat Recovery Unit 

The quality of the air and its purity, temperature and humidity are fundamental elements for comfort, especially in the winter.

A controlled mechanical ventilation system is the best solution to maintain both the energy performance levels of a building and the quality of indoor air.

To achieve indispensable air exchange in a building and ensure good air quality in the rooms, it is fundamental to install a controlled mechanical ventilation system. The renewal of air in the rooms is in fact indispensable for correct housing hygiene.

HiDew ROE and RVE heat recovery controlled mechanical ventilation is the best solution to reduce the energy usage of the home while improving the overall cleanliness of the rooms.

 

1550835613 productsImmagine REV con logo Hidew 1

Hidew REV Residential Dehumidifier

Hidew REV Residential Dehumidifier

The REV series dehumidifiers with extremely high efficiency heat recovery are designed for use in buildings with radiant cooling where in addition to the dehumidifier, an air exchange system is also included. The REV dehumidifiers have the function of dehumidifying, cooling, heating and exchanging air by recovering the heat of the expelled air.

 
The adjustable electronic fans with permanent magnet brushless motor with latest generation built-in inverter, guarantee a high head and optimize electricity consumption.
 

1550835621 productsHidew dehumidifiers air renewal RER 1

Hidew RER Residential Dehumidifier

Hidew RER Residential Dehumidifier

The RER series dehumidifiers with extremely high efficiency heat recovery are designed for use in buildings with radiant cooling where in addition to the dehumidifier, an air exchange system is also included. The RER and REV dehumidifiers have the function of dehumidifying, cooling, heating and exchanging air by recovering the heat of the expelled air.

 

The adjustable electronic fans with permanent magnet brushless motor with latest generation built-in inverter, guarantee a high head and optimize electricity consumption.

 

hidew

Hidew RSV Residential Dehumidifier

Hidew RSV Residential Dehumidifier

The dehumidifiers of the RSV horizontal series are designed for use in civil, residential and commercial environments with high latent load whereby
24 h / day operation is required.

They are particularly suitable in buildings where the room is cooled by radiant systems such as floors, walls or ceilings. HiDew dehumidifiers can be connected and supervised with the RS485 serial port.

rse

Hidew RSO/RSE Residential Dehumidifier

Hidew RSO/RSE Residential Dehumidifier

The dehumidifiers of the RSO / RSE horizontal series are designed for use in civil, residential and commercial environments with high latent load whereby
24 h / day operation is required.

They are particularly suitable in buildings where the room is cooled by radiant systems such as floors, walls or ceilings. HiDew dehumidifiers can be connected and supervised with the RS485 serial port.
1448902225 productsSTR

Hidew STR Swimming Pool Dehumidifier

Hidew STR Swimming Pool Dehumidifier

The STR series units are ideal for when dehumidification is insufficient, and a strong exchange of indoor air without dispersion of the internal heat outside, as well as for room temperature control is much needed.
The high efficiency recuperator guarantees yields of up to 80%. The units of this series represent the state of the art in terms of efficiency, reliability and sound power emitted.
1450341197 productsspr

Hidew SPR Swimming Pool Dehumidifier

Hidew SPR Swimming Pool Dehumidifier

SPR units are the ideal answer when a swimming pool requires a strong exchange of internal air without dispersing the heat of the internal environment outside.

1450343009 productsst

Hidew ST Swimming Pool Dehumidifier

Hidew ST Swimming Pool Dehumidifier

The dehumidifiers of the IT and ST series are designed for use in environments with a high latent load, where 24h / day operation is required.

Thanks to the temperature control function, through a remote external condenser, these units guarantee control, not only of humidity, but also of ambient temperature.

1450338859 productssp

Hidew SP Swimming Pool Dehumidifier

Hidew SP Swimming Pool Dehumidifier

The dehumidifiers of the ID and SP series are designed for use in environments with high latent load where 24 h / day operation is required.
1551262227 productsImmagine

Hidew DOS Swimming Pool Dehumidifier

Hidew DOS Swimming Pool Dehumidifier

The DOS series dehumidifiers are designed for use in small private pools where suspended ceiling installation is required.
DOS dehumidifiers are perfect for all humid environments such as museums, libraries, archives, cellars.

Designed for suspended ceiling installation, they can also be supplied with all air distribution accessories such as plenums, grids, channels. The series consists of 7 models, from 67 up to 225 L / day.

1450283110 productsdvs

Hidew DVS Swimming Pool Dehumidifier

Hidew DVS Swimming Pool Dehumidifier

The new DVS series dehumidifiers with advanced control are designed for use in small private pools where vertical installation is required. The pleasant design also perfectly adapts to other environments, such as museums, libraries, archives and cellars.

Designed for installation directly in the room to be dehumidified, they have an elegant aesthetic. The series consists of 7 models, from 68 up to 230 L / day.

1550663072 productsDCS HIDEW

Hidew DCS Swimming Pool Dehumidifier

Hidew DCS Swimming Pool Dehumidifier

The dehumidifiers of the DCS series with advanced control are designed for use in small private pools where wall installation is required. The DCS is suitable for environments such as museums, libraries, archives, cellars and underground rooms.

 

1550663227 productsDDS HIDEW

Hidew DDS Swimming Pool Dehumidifier

Hidew DDS Swimming Pool Dehumidifier

The dehumidifiers of the DDS series with advanced control are designed for use in small private pools where wall installation is required. The DDS is suitable for environments such as museums, libraries, archives, cellars and underground rooms.

 

klover smart 120 BT

Klover Smart 120 BT Pellet Boiler Cooker

Klover Smart 120 British Traditional Pellet Boiler Cooker

The Smart 120 BT has the same high efficiency and automation of the contemporary Smart 120 but with a more traditional look.

With its clean, elegant lines, the Smart BT will happily fit into any kitchen. It might look like a traditional solid fuel cooker but it will be quietly taking care of the central heating and hot water as well as providing a hot oven and a hotplate to cook on.

The Smart 120 BT is available in black, red and cream and has optional hob covers.

 

 

dea eco 8

Klover DEA ECO Pellet Stove

Klover DEA ECO 6.8.12 

With a choice of three outputs, 5 kW or 9.6 kW, the DEA ECO 6, DEA ECO 8, and DEA ECO 12 are capable of heating a good-sized space but without the need for plumbing or radiators.

With the cosiness of a real flame and the automation of a pellet stove, they offer an inexpensive and straightforward solution to almost anyone.

The DEA ECO radiant pellet stoves are characterized by their technical excellence, the high quality materials used in their construction and the elegance of their design.

 

k top cooker wood boiler

Klover STORIKA K-KP Wood Boiler Cooker

Klover STORIKA K-KP Wood Boiler Cooker

STORIKA K-KP is a multi-functional wood boiler designed to warm up your whole home and it can also be used as a cooktop range too.

All your radiators will quickly become hot with minimum log usage, spreading heat in every room whilst supply domestic hot water for the whole family.

 

DETAILS: 

Net weight: 250 kg

Dimensions W x H x D: 1000 x 870 x 600 mm

 

pfp240

Klover PFP 160 / 240 GLASS pellet boiler

Klover PFP 240 GLASS Insert Fireplace

Klover PFP 240 GLASS has an efficiency of over 90% at full power and an astonishing 95.9% efficiency at reduced output, making it one of the most efficient wood pellet boilers ever made.

With 12.3kW ~ 18.6kw going into the central heating and hot water, this is a powerful stove and yet the 62 kg internal pellet hopper gives it an exceptionally long-running period between fills.

 

Klover boiler fire place tkr 35 2

Klover TKR 35 Wood Boiler Fire Place

Klover Wood Boiler Fire Place TKR 35

The Klover TKR 35 is extremely well made and the quality of the design, finish and material specification shines out.

The TKR will produce up to 17 kW of hot water and pass up to 11.5 kW of heat to the room at a very impressive 83% efficiency.

Suited for open-vented or pressurised systems, the TKR features Klover’s unique Sicuro Top safety system, which makes linking this stove into an existing heating configuration very straightforward.

There is also the option for a combi-coil, which can give instant domestic hot water when the stove is running.

 

Klover wood fire utility boiler

Klover Wood Utility Boiler KL 29/40

Klover Wood Utility Boiler KL 29/40

The Utility Boiler 29 produces up to 28.8 kW output and, like its larger brother, it maximizes the heat from the flue gases as well as the flames, giving it an efficiency rating 83%.

The Utility Boiler 40 gives out up to 38.6 kW of heat, making it ideal for providing heating and hot water for large houses.

 

DETAILS: 

Wood Boiler KL 29

Net Weight 290 Kg

Dimensions W x H x D  650 x 500 x 650 mm

 

Wood Boiler KL 40

Net Weight 305 Kg

Dimensions W x H x D 650 x 1500 x 650 mm

 

KL 29-40 Wood Utility Fire Boiler

KL 29-40 TOP INSTALL MANUAL

Delonghi Radel Steel Panel

Delonghi Radel Steel Panel Radiator

Delonghi Radel Steel Panel Radiator 

Hydronic panel radiators are not only of high performance- elegance, superb finish, and design are an integral part of the completed product.

DeLonghi panel radiators are only made by using top quality techniques and materials.

 

The radiant steel panel guarantees high thermal efficiency and great reliability.

 

DETAILS: 

Finish: high gloss white, unique finish both scratch and corrosion resistant

Colour: Standard white – RAL 9016

Measurements:  Heights from 300 mm to 900 mm. Widths from 400 mm up to 3000 mm.

Available as single, compact, double, and triple panels.

 

Delonghi Radel Steel Panel Radiator

LV1 panel radiator

LVI Panel Radiator – Yali Digital –

LVI Panel Radiator – Yali Digital –

The Yali Digital offers superb flexibility in controlling temperature with a minimal visual display discreetly moulded onto the side panel. The control can be touch screen and connected to WiFi. The versatile touch screen control comes in many sizes and is able to be upgraded when new functions become available.

If a significant increase in temperature is needed, the radiator can be controlled to use both radiant and convective heat.

 

DSC 7405

Delonghi Tubular Radiator

Delonghi Tubular Radiator 

Tubular radiators can be used as an architectural feature of your home while combining looks and warmth in one superior product.

A key feature of the tubular radiators is the perfectly smooth lustrous finish without any traces of weld joints, allowing you to make a statement or blend with any interior decor.

Every DeLonghi radiator has a 10 year guarantee against design or manufacturing defects from the date of installation.

 

DETAILS: 

Finish: High gloss white

Colour: Standard white- RAL 9016

Measurements: Available in 2, 3 , 4, 5 and 6 columns in various heights. Each section width 46 mm.

ALIGEL HC20 BIO

Facot ALIGEL HC20 Bio

FACOT ALIGEL HC20 BIO, TANKS 5 KG

TThermovector antifreezing fluid with high heat exchange, long lasting. Ready-to-use product added with fluorescent liquid, leaks detector. Special for solar panels, tested against chemical stress according to GCF-CEG-FL-21-A-0 Regulation

 

FACOT FILMAX 7.0

FACOT FILMAX 7.0 1L

FACOT FLIMAX 7.0 

The ANTINEX + Thermakil chemical treatment is a scale remover, detergent for oxides, sludge and mud.

It protects installations and reduces the excessive formation of encrustations. It keeps lime scales and deposits in suspension in the plant.

 

FACOT FILMAX BOTTLE

Facot ANTINEX Bottle

FACOT ANTINEX BOTTLE (1 Litre)

The ANTINEX + Thermakil chemical treatment is a scale remover, detergent for oxides, sludge and mud.

It protects installations and reduces the excessive formation of encrustations. It keeps lime scales and deposits in suspension in the plant.

 

LVI Towel Warmer – Nila –

LVI Towel Warmer – Nila –

Nila towel warmer is simple to install, and consumes no more electricity than a light bulb.
Available in a chrome or white gloss finish, its rounded corners and rails create an impression of softness. The Nila R comes with a concealed or visible cable connector, giving it the flexibility to blend perfectly into your kitchen or bathroom. Connection points are available on the bottom left- or right-hand sides of the unit.
The Nila R comes with an adjustable temperature control so you can always find the ideal temperature.

 

DETAILS: 

    • Liquid-filled towel warmer
    • Strong Steel of the highest quality
    • Quiet and Odour-free
    • Easy to install
    • Very low energy consumption (70-100 W)
    • Choose between white RAL 9016 and chrome finish
    • Available in two widths: 45 and 62 cm
    • Max. surface temperature 60 degrees Celcius
    • Adjustable temperature control

 

>LVI Towel Warmer Brochure

 

195 smartheat solar collector 1415

Micoe SmartHeat Solar Flat Roof Frame

SMARTHEAT SOLAR: FLAT ROOF FRAME

 

DETAILS: 

SH-FRF  Upright aluminium frame for a flat roof (one set per solar tube collectors)

Solar tube collectors in the image are not included

IVAR Solar Pipes S00

SmartHeat Dual Helical 25M & 15M Roll

SMARTHEAT: DUAL HELICAL 25M & 15M ROLL

3/4” & 1″ AISI 304 Dual Tube, Insulation. Sensor line & Braid Slip

 

DETAILS: 

SHSOLAR25R3/4  25m Roll Tube

OD: 18.00 mm, ID: 13.90 mm, 0.3T, Pitch: 5.00 mm

 

SHSOLAR15R3/4  15m Roll Tube

OD: 18.00 mm, ID: 13.90 mm, 0.3T, Pitch: 5.00 mm

 

SHSOLAR25R1  25m Roll Tube

OD: 25.60 mm, ID: 21.10 mm, 0.3T, Pitch: 5.56 mm

 

SHSOLAR15R1  15m Roll Tube

OD: 25.60 mm, ID: 21.10 mm, 0.3T, Pitch: 5.56 mm

FLB70 2 Flow Meter Solar Fittings PAGE 28

IVAR Flow Meter

IVAR: FLOW METER

Flow meter with by-pass for high flow rates available for Solar

 

DETAILS: 

FLB70  1”1/4 DN 32

VSC00 1

IVAR Safety Valve

IVAR: SAFETY VALVE

Safety valves for solar applications

 

DETAILS: 

5702323  1/2” M x 1/2” F, 3 Bar

Placeholder

Micoe SmartHeat Solar R5-F Frame Accessories

MICOE SMARTHEAT SOLAR: COLLECTOR PACKAGE

Evacuated Tubes with Manifold & Flat Frame. Size 0.433 m³, Efficiency 71.3% (Aperture Area).

 

DETAILS: 

TZ58/1800-30R5  30 Evacuated Tubes. Tube: 58 mm/1.8 m

Manifold

Flat Frame (Dimensions L2010 x W2420 x H189 mm)

Net Weight 122 Kg

rso dehumidifier

[Hidew] Rso Hydronic Dehumidifier

HIDEW: RSO HYDRONIC DEHUMIDIFIER

Horizontal duct dehumidifiers for drop ceiling are designed for civil,

residential and commercial environments with high latent load that require

24 hrs/day operation.These are particularly suitable for buildings cooled by

radiant system, such as flooring, wall or ceiling.

 

hidew

[Hidew] Pool Dehumidifier

HIDEW: POOL DEHUMIDIFIER

State of the art Dehumidifiers ideal for all size pools

DDS series dehumidifiers with advanced control are completely autonomous and are conceived for wall-mounted installation in
small private swimming pools.

7114070

[Zetco] Valve Kit 20 mm

ZETCO: VALVE KIT

suitable for Domestic Hot Water Boiler (21E, 26E, 32, 32Q, 32C)

 

DETAILS:

6310001 Water 20mm Press-fit and Gas 20mm Press-fit

sanden 2

Sanden 160L Eco Plus Hot Water Heat Pump System 160SAQA

SANDEN: HEAT PUMP UNIT

Individual Heat Pump Unit. Can be up to 4 metres away from the tank.

 

DETAILS:

GAU-A45HPFT  Power Input. 1.0 kW. Ambient Air Operating

Temperature -10 ºC to + 43 ºC. 38 dB. COP (Heating

Efficiency) 4.5^. 1/2″ BSP, 12.7 mm. Weight 56 Kg

 

 

SH 100 front b

SmartHeat SH-100 Stainless Steel Thermal Buffer Tank

SMARTHEAT: THERMAL BUFFER TANK

Capacity 100 Litre. Electric element 3 Kw. Internal tank material 1.2 mm. Stainless steel 304

Height 1035 mm. Diameter 470 mm. Weight empty 26 Kg

Weight approx full 126 Kg. Tank insulation polyurethane insulation 8 mm.

Outer tank normal steel painted white 0.5 mm. Recommended maximum temp 90ºC

SH 600 front 1

SmartHeat SH-400 II Aquacell Thermal Stainless Steel Heat Exchanger Storage Tank

SMARTHEAT: SH-400 II AQUACELL THERMAL STAINLESS STEEL

HEAT EXCHANGER STORAGE TANK

Use for underfloor heating, solar, domestic hot water capacity 400 Litre

4 electrical elements. 2 Coils. Material internal 1.2 mm, inner tank stainless steel 304

Height 1810 mm, diameter 650 mm. Weight empty 55 Kg, weight approx full 455 Kg

Tank insulation polyurethane insulation 50 mm, wet back max temp 90ºC.

 

SH 600 front

SmartHeat SH-600 II Aquacell Thermal Heat Exchanger Storage Tank- 2 Coil System

SMARTHEAT: SH-600 II AQUACELL THERMAL STAINLESS STEEL

HEAT EXCHANGER STORAGE TANK

Used for underfloor heating, solar, domestic hot water capacity 600 Litre

Material Internal 1.2 mm. Inner tank stainless steel 304, height 1873 mm, diameter 760 mm

Weight empty 121 Kg, weight approx full 721 Kg

Tank insulation polyurethane insulation 80 mm, wet back max temp 90ºC

SH 1000 front colour

SmartHeat SH-1000 II Thermal Heat Exchanger Storage Tank- 2 Coil System

SMARTHEAT: SH-1000 II THERMAL STAINLESS STEEL HEAT EXCHANGER STORAGE TANK

Used for underfloor heating, solar, domestic hot water capacity 1000 Litre

Material internal 2.0 mm. Inner tank stainless steel 304, coil type Helical Corrigated ANSI316L

Height 2541 mm, diameter 860 mm, weight empty 155 Kg

Weight approx full 1155 Kg. Tank insulation PU sponge insulation jacket 80 mm

SH-1000 II

Details

SH-1000 II

NEW VD2105

IVAR Lockshield

[IVAR] Lockshield

Straight thermostatic valve with male connection

 

Details

520077RC EUROK x 1/2“ M O-ring

30091

Siemens Electromotoric Actuators

SIEMEN: ELECTROMOTORIC ACTUATORS

Ideal 3-position control in heating systems, chilled ceiling and terminal units,

radiators, mini combi valves and small valves.

 

Details

SSA31 Operating Voltage 230V 3-Position Control signal.

1.5m Cable None Modulating system.

SSA61 Operating voltage AC/DC 240V DC Control signal.

1.5 m Cable Modulating system.

WLCT2 19

IVAR Chronothermostat

IVAR: CHRONOTHERMOSTAT

Internal thermostat auto with 4 adjustments. Range : +5ºC/ +35ºC

Timed thermostat with 4 adjustable time slots.

 

Details

WLCT2-19 Internal thermostat with 4 adjustments

SmartHeat Hydronic Heating Wiring Centre

SMARTHEAT: HYDRONIC HEATING WIRING CENTRE

Waterline heating system has been developed to provide a temperature.

Control system for room heating/cooling, integrating the switching of primary

heating sources with the control of water temp and mixing device.

This ensures the best possible comfort conditions and also reduces energy consumption.

Power Source 100-240VAC 50/60HZ, Mx Relay contact 250VAC 10A,

Operation Temp: -20ºC ~ 60ºC ,Storage Temp: -20ºC ~ 70ºC.

 

 

Details

SH209 100- 240 VAC, 50/60HZ

IVAR LAGO0321 PAGE 18

IVAR Lago Controller 0321

IVAR: LAGO CONTROLLER 0321

Climate control unit with external sensor, delivery sensor and boiler sensor.

 

Details

99797311 8 Outputs for electro thermostatic

Thermostat SH908FCT 4B

SmartHeat Fan Coil Thermostat

SMARTHEAT: FAN COIL THERMOSTAT

Heat/cool, 3-speed fan, 4-pipe fan coil unit, dimensions:115 x 90 x 28 mm

Electrical rating 100-240VAC, 50/60HZ. Fan relay amps inductive 5(3)A heat/cool

Relay amps inductive 1(0.5)A, set point temp range 5ºC to 35ºC.

Colour white.

 

Details

SH908FC T-4B 4 Pipe fan coil unit heating and cooling

Siemens Cable Temperature Sensor

SIEMENS: CABLE TEMPERATURE SENSOR

The sensor is used as: (1) return air temperature sensor

(2) changeover sensor. Cable Temperature sensor with ferrules.

 

Details

QAH11.1 Cable temperature sensor

Siemens Room Temperature Sensor

SIEMENS: ROOM TEMPERATURE SENSOR

HVAC plants to acquire the room temperature.

For use with controller whose sensor signal input are not

galvanically separated from the AC 230V mains.

 

Details

QAA32 Room temperature sensor

AUTOMATIC THERMOSTAT RDE100.1 PAGE 19

Siemens Automatic Thermostat

SIEMENS: AUTOMATIC THERMOSTAT

Room Thermostat with Auto Timer, Option External Input.
The Thermostat allows you to set the room temperature at a time you want.

Control, 2-position control with on/off output for heating.
Auto time Switch Comfort, Economy, Auto timer and Protection mode.
Adjustable commissioning and control parameters.

Placeholder

[Tia] Calibrator 16-32 mm

TIA: CALIBRATOR 16 – 32 MM
Allows easy installation of pipe fittings. Material, Plastic

 

Details
F-693754  16mm Dia. 100 x 90 x 20mm

F-693761  20mm Dia. 110 x 100 x 30mm

F-693778  25mm Dia. 110 x 110 x 40mm

F-693785  32mm Dia. 110 x 110 x 50mm

Calibrating and chamfering PEX / AL / PEX Pipes

Placeholder

IVAR Single Circuit Mixing Unit

IVAR: SINGLE CIRCUIT MIXING UNIT
Underfloor heating single circuit mixing unit without pump.

Blender range: 35-65 °C Thermostat setting: approx. 40 °C /

Differential: 8-10 K with respect to closure temp. Max operating static

pressure : 10bar / 145psi. Max primary fluid temperature : 90 °C

 

Details

506717WP  10bar/145psi. Max primary fluid temp: 90°C

Placeholder

IVAR Multifloor Mixing Unit

IVAR: MULTIFLOOR MIXING UNIT
Multifloor underfloor heating mixing unit without pump. The system

can be completed with IVAR manifolds featuring balancing and con

control valves on each radiant distribution circuit, and with horizontal- or

vertical-structure manifold kits to supply high-temperature heating bodies

upstream of the mixing zone.

 

Details

500414  Max working temperature (except pumps) 90 °C

Thermostatic mixer adjustment: max 53°C 10 bar

itap907 sm

IVAR Stainless Steel Manifold Kit

IVAR: STAINLESS STEEL MANIFOLD
Stainless Steel manifold kit with auto airvent, flow meters / adjusters
FLUXER (0-5L/min), return manifold with protection cap for thermostatic
insert, brakets and EUROK connections.

Details
503202AIVX1  1 ” X EUROK 2 WAYS

503203AIVX1  1 ” X EUROK 3 WAYS

503204AIVX1  1 ” X EUROK 4 WAYS

503205AIVX1  1 ” X EUROK 5 WAYS

503206AIVX1  1 ” X EUROK 6 WAYS

503207AIVX1  1 ” X EUROK 7 WAYS

503208AIVX1  1 ” X EUROK 8 WAYS

503209AIVX1  1 ” X EUROK 9 WAYS

503210AIVX1  1 ” X EUROK 10 WAYS

503211AIVX1  1 ” X EUROK 11 WAYS

503212AIVX1  1 ” X EUROK 12 WAYS

503213AIVX1  1 ” X EUROK 13 WAYS

VAR20P PAGE 8

IVAR Varimix 11 High Temp Kit

IVAR: VARIMIX 11 HIGH TEMP KIT

Pump with and without dif by -Pass valve 1”1/4

 

Details

550610P: Varimix 11 high temp kit without dif bypass

550611P: 1”/14 with bypass valve

 

 

Wilo Top Z 1

[WILO] Top Z Circulation Pump

[WILO] TOP Z CIRCULATION PUMP
Glandless Circulation Pump Brass Body Manual power adjustable through

2-speed selector switch, inbuit motor thermal protection.

Unique self venting design to ensure long-term operation.

All units supplied with bronze housing.

Details

2127302  25/10 EM-AU, 1” Manual adjustment, 3speed
2127303  30/10 EM-AU, 1”1/4 Manual adjustment, 3speed

Wilo Star Z PAGE 7 photoshopped 1

[WILO] Star Z Circulation Pump

WILO: STAR Z CIRCULATION PUMP
Glandless Circulation Pump Brass Body Star-Z 15-TT features integrated

timer and thermostat plus isolation valve and non-return valve pre-mounted

to pump, Star-Z 20/7-3, features sanitary stainless steel pump housing

Remaining units supplied with bronze housing.

Details

4110919  1/2” Circulation pump, Union 15/B needed
4184746  3/4” Circulation pump, Union 20/B needed

4047573  1”    Circulation pump, Union 25/B needed

AVG PRESSURE LV FXF

[AVG] High Pressure Temperature Relief Valve

AVG: HIGH PRESSURE TEMPERATURE RELIEF VALVE
Ideal for installation with high-pressure storage water heaters.

Suits inlet pressures up to 2000Kpa, operates at up to 80ºC.

 

Details
PLV20/600F   Pressure Setting 600kPa

PLV20/500F  Pressure Setting 500kPa

PLV20/350F  Pressure Setting 350kPa

tva yellow1

[AVG] 20 mm Tempering Valve Assembly

AVG: 20 MM TEMPERING VALVE ASSEMBLY 
Suitable for strong water system cold water supply temp: 5ºC -25ºC, hot
water supply temp: 65ºC – 85ºC . Flow Rate. 4Ltr/min

Details

TVA20C-1 20mm Tempering Valve
TVA15C-1 15mm Tempering Valve

20 mm pressure reducing valve

[AVG] 20mm Pressure Reducing Valve

AVG: 20 MM PRESSURE REDUCING VALVE
Non Return Isolation Pressure reduction valve Combination Adjustable

Range 150-600 kPa, Factory set at 500kPa, Max Inlet Pressure

1600kPa, Max working Temp: 80ºC, Flow rate K @ 700 kPa.

Details
PRV20 20mm 3/4”

Solar Tempering Valve

[AVG] 20 mm/15 mm Tempering Valve Assembly

AVG: 20 MM TEMPERING VALVE ASSEMBLY 
Suitable for Solar +instantaneous hot water system ,cold water supply
temp: 5ºC -25ºC, Hot water supply temp: 65ºC – 99ºC
Adjustable outlet temp range 40ºC – 50ºC. Flow rate Min. 4Ltr/min.

Details

TVA20CHP-1 20mm Tempering Valve c/w. With Insulation boot
TVA15CHP-1 15mm Tempering Valve c/w. With Insulation boot

Untitled

[AVG] Pressure Temperature Relief Valve

AVG: Pressure Temperature Relief Valve 
The Pressure and Temperature Relief valve (PTR) is designed to relive

the increase in pressure caused by water expansion during the normal

heating cycle.

Details
PRT20/1000  20mm 3/4” P&T Relief Valve

147 wwk302 302h

Stiebel Eltron 302L Heat Pump Hot Water Unit WWK302

STIEBEL ELTRON: ENERGY EFFICIENT HEAT PUMP 

Energy Efficient Heat Pump for domestic hot water

Details

WWK 302     302L, 550W, 10A
WWK 302H  302L, 550W, 10A, Smart Element
WWK 222     220L, 550W, 10A
WWK 222H  220L, 550W, 10A, Smart Element

 

195 smartheat solar collector 1415

SmartHeat Solar Collector Package

SMARTHEAT SOLAR COLLECTOR PACKAGE

30 Evacuated Tubes. Tube: 58mm/1.8m with Manifold and Flat Frame (Dimensions L2010 x W2420 x H189mm).

Unique SmartHeat Micoe Solar Collector Package with 30 Evacuated Tubes with Manifold and Flat Frame. Size 0.433m³, efficiency 71.3% (Aperture Area).
Frame (Dimensions L2010 x W2420 x H189mm).
Net Weight 122kg

194 smartheat solar stainless steel tank package gas boosted

Micoe SmartHeat Solar 30 Solar Tubes & Tank Package

SmartHeat and Micoe Solar have put together a complete solar hot water system comprising of, 30 Collectors the Manifold. 315L Enamel Vitreous Tank. Electrical Element. Wilo Circulation Pump. Sensors and Controller and with a Flat Frame.

Comprising of.
30 Tube Collector Panel
315 Litre Vitreous Enamel tank with a back up electrical element
2 x Sensor wells. 2 x Brass T’s. 2 x Pump unions
1 x Wilo 15/6 circulation pump
1 x Solasmart Plus Controller
Comes with flat frame.
All upright frames for flat roofs are an extra and not included in the packages.

 

DETAILS: 

TZ58/1800-30R5  30 Evacuated Tubes. Tube: 58 mm/1.8 m

Manifold

Flat Frame (Dimensions L 2010 x W 2420 x H 189 mm)

Net Weight 122 kg

170 5000 w accessories flue kit

Bosch 5000 W Horizontal Telescopic Flue Kits And Accessories

60/100mm horizontal telescopic flue kit L 350mm-570mm. Please order each element individually and add to your cart.

Sizes *
6/100mm Horizontal Telescopic Flue Kit L 350mm -570mm
80/125mm Horizontal Flue Kit L1200mm

ACCESSORIES *
60/100mm Extention Flue Kit L 220mm
60/100mm High Level Horizontal Flue Adaptor
80/125mm High Level Horizontal Flue Adaptor
60/100mm Extention Flue Kit L 960mm
60/100mm 45 Degree Elbow(2unit)
60/100mm 90 Degree Elbow
60/100mm Support Bracket Kit

Installation
Flue kits for the Bosch 5000 W Range. 60/100mm horizontal telescopic flue kit L 350mm-570mm. Please order each element as required individually.
If you require further information on the various flue kit sizes and accessories please contact Hydrosupply.com.au

157 bosch standard efficiency hydronic boiler

Bosch Standard Efficiency Hydronic Boiler

30Kw heat output, available in NG and LPG. Efficient and compact.

Details
Options(Size *)
30Kw Heat Output. NG
30Kw Heat Output. LPG

Bosch setting thestandard in efficient domestic hydronic heating the WBN6000-30NG. 30Kw heat output, Excellent efficiency, Compact, modern design. Quiet operation User friendly controllers,Available in NG and LPG, External Installation.

155 bosch condensing hydronic heaters

Bosch Condensing Hydronic Heaters

5000W Condensing Hydronic Heating Boilers – 18Kw – 30Kw and 37Kw

Details
ZSB 182A *
5000 W 18 Kw Cond NG/LPG
5000 W 30 Kw Cond NG/LPG
5000 W 37 Kw Combi NG/LPG

The range available in 5000W Condensing Hydronic Heating Boiler – 18Kw- 30Kw-37Kw
The Bosch Condensing 5000W System Boilers 18Kw and 30Kw, take care of heating home
easy to install hydronic heating solution.Many of the components of the system,
Such as Expantion vessel, are built into the Bosch Hydronic heating boiler itself,making it.
quick and easy to install.

The Bosch Condensing 5000W 37Kw Boiler
The Bosch Condensing 5000W 37Kw Combination Boiler is a gas condensing boiler that is capable of
providing both central heating and domestic hot water. Combining two appliances, a Bosch ‘Combi’ boiler
uses high-efficiency condensing technology for both heating and domestic hot water.

99 solastat st controller

SOLASTAT St Controller

None adjustable thermostat
Solar Controller / 240VAC 50Hz. Three Sensor( Lower, Tank, and Roof sensors) Two out for Solar pump and HWC Boosting pump(240VAC).None adjustable thermostat

98 solastat pool controller

SOLASTAT Pool Controller

Solar Pool controller 240v.
Pool Controller. Two sensors (Pool & Roof). One output (240VAC) for pool pump LED display c/w 8 status lights. High Quality,efficiency, reliability and +/- 1C Accuracy Enclosure and cable UV resistant, Water resistant, rear cable entry option Rear Cable Entry Option.2HP(1500W) Relay Standard.

97 solastat alphastat plus

SOLASTAT Alphastat-Plus

Hot Water Controller. Adjustable Value Range 240v.
Hot water sensor one output for circulation automatic HWC element controller. Save power, save money digital LED display c/w 8 status lights , bio-safe function reliability and +/-1C accuracy.
Stainless steel, water resistant, temp sensor enclosure and cables UV resistant. Water resistant and rear cable entry options.

94 smartheat electrothermal head

SmartHeat Electrothermal Head

SMARTHEAT ELECTROTHERMAL HEAD

Electrothermal actuator open and close valve.

Voltage AC 230V 110V 24V.

Power Consumption: >2W, stroke: 3 mm, force: 130 F 80N.

Ambient temp: -10 + 60ºC, ambient humidity 90%, protective housing: IP45, valve interface: M30*1.5

87 itap straight male connector

[ITAP] Straight Male Connector

Straight Male Connector. 1/2” x 20. – 1 ¼” x 40

Size *
1/2” x 20
3/4” x 25
1” x 32
1 ¼” x 40

Suitable for use with low and high density polyethylene Pipes. Minium and Max Tempreatures -20C -110C. Nominal Pressure 25bar.

86 itap 3 piece elbow with o ring

[ITAP] 3-Piece Elbow With O-Ring

3-Piece Elbow With O-Ring. 1/2” Din 15. 50 bar / 725psi. – 1 ¼” Din 32. 30 bar /435psi

Size *
1/2” Din 15. 50bar/725psi
3/4 Din 20. 40bar/580psi
1” Din 25. 40bar/580psi
1 ¼” Din 32. 30bar/435psi

Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. Body in brass or nickel-plated brass.

85 itap 3 piece straight connector with o ring

[ITAP] 3-Piece Straight Connector With O-Ring

3-Piece Straight Connector With O-Ring – 1/2” Din 15. 50 bar / 725psi – 1 ¼” Din 32. 30 bar / 435psi

Size *
1/2” Din 15. 50bar/725psi
3/4 Din 20. 40bar/580psi
1” Din 25. 40bar/580psi
1 ¼” Din 32. 30bar/435psi

Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. Body in brass or nickel-plated brass.

84 itap 3 piece straight connector flat washer

[ITAP] 3-Piece Straight Connector Flat Washer

Straight Connector.1/2” Din 15. 50 bar / 725psi – 1 ¼” Din 32. 30 bar / 435psi

Size *
1/2” Din 15. 50bar/725psi
3/4 Din 20. 40bar/580ps
1” Din 25. 40bar/580psi
1 ¼” Din 32. 30bar/435psi

Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. Body in brass or nickel-plated brass.

82 maincor joint unit nut

[MAINCOR] Joint Unit Nut

Mainpress Joint unit nut female thread. 16 x ½” FT – 32 x 1 ¼” FT

Size *
16 x ½” FT
16 x ¾” FT
20x ½” FT
20 x ¾”FT
25 x 1” FT
32 x 1 ¼” FT

Mainpress Joint unit nut female thread. Mainpress Joint unit nut female thread Maincor Straight Press to Female Thread Connectors with a swivel nut are used to connect multilayer pipework to a wide variety of system components

81 maincor coupling reduced

[MAINCOR] Coupling Reduced

Mainpress Coupling Reduced Fittings. 20 x 16 – 40 x 32

Size *
20 x 16
25 x 16
25 x 20
32 x 20
32 x 25
40 x 32

Mainpress Coupling Reduced Fittings. Maincor Straight Press coupling reducers are used where straight lengths in excess of 5m are required. By utilising the straight press fitting, multiple 5m lengths can be coupled together, giving the desired installation length.

80 maincor coupling

[MAINCOR] COUPLING

Mainpress Coupling Fittings. 16 x 16 – 40 x 40

Size *
16 x 16
20 x 20
25 x 25
32 x 32
40 x 40

Mainpress Coupling Fittings. Maincor Straight Press coupling are used where straight lengths in excess of 5m are required. By utilising the straight press fitting, multiple 5m lengths can be coupled together, giving the desired installation length.

79 maincor female elbow

[MAINCOR] Female Elbow

Mainpress Male Elbow Connector.16 x ½” FT – 32 x 1” FT

Size *
16 x ½” FT
20x ¾” FT
25 x 1” FT
32 x 1″ FT

Mainpress Male Elbow Connector. Maincor Press Male Elbow to male thread connectors are to be used when a 90º elbow is required when joining to a BSP connection.

78 maincor male elbow

[MAINCOR] Male Elbow

Mainpress Male Elbow Connector.16 x ½” FT – 32 x 1” FT

Size *
16 x ½” FT
20x ¾” FT
25 x 1” FT
32 x 1″ FT

Mainpress Male Elbow Connector. Maincor Press Male Elbow to male thread connectors are to be used when a 90º elbow is required when joining to a BSP connection.

76 maincor male connector

[MAINCOR] Male Connector

Mainpress Male Connector.16 x ½” MT – 40 x 1 ¼”MT

Size *
16 x ½” MT
20x ½” MT
20 x ¾”MT
25 x ¾” MT
25 x 1″ MT
32 x 1″ MT
32 x 1 ¼” MT
40 x 1 ¼”MT

Mainpress Male Connector. Maincor Straight Press to Male Connectors are used to connect multi-layer pipework to a wide variety of system components. The Male thread is a BSP connection and is also used in conjunction with plumbers fittings to achieve final connections

75 maincor wall elbow

[MAINCOR] Wall Elbow

Mainpress Wall Elbow Female Thread.16 x ½” FT and 20 x ½” FT

Size *
16 x ½” FT
20 x ½” FT

Mainpress Wall Elbow Female Thread. Maincor press wall plate Elbows allow an outside tap or other similar connections to be piped in multilayer pipework and adapted to 1/2” or 3/4” Female thread.

74 maincor tee reducer

[MAINCOR] Tee Reducer

Mainpress Tee Reducer. 20 x 16 x16 upwards

Size *
20 x 16 x16
20 x 16 x 20
25 x 16 x 25
25 x 20 x 20
25 x 20 x 25
32 x 16 x 32
32 x 25 x 25
32 x 20 x 20
32 x 25 x 32
40 x 20 x 40
40 x 25 x 40
40 x 32 x 40

Mainpress Tee Reducer.
Maincor Reducing Press Tees are used to branch off main distribution pipework, allowing effective distribution to multiple services.

69 tia castellated foil with eps styrofoam 1400mmx800mm

[TIA] Profi System Duo Board With Insulation

Floor Insulation .14-17 Diameter. EPS 150. 1400x800x11mm and 30mm

Size *
14-17 Diameter. EPS 150. 1400x800x11mm
14-17 Diameter. EPS T 040. 400x800x30mm

System boards to surface heating are a products with acoustic insulation and high heat insulation characteristic.With EPS styrofoam 30 & 11mm, 1400mmx800mm.

42 ivar varimix pressure equaliser

IVAR Varimix Pressure Equaliser

Hydraulic separator/pressure equalizer with temperature/pressure gauge and automatic air vent valve for VARIMIX system.

This solution gives the opportunity to manage multiple thermal areas with different characteristics as truly independent zones in a neat, rational space, thanks to its modular structure and outstanding installation flexibility.

Sizes G 1 1/4” – Q Max 4.500 l/h

19 refilling system valve train

Refilling System Valve Train

2 Ball Valves + 1 Refilling valve + 1 Anti pollution valve + 1 Strainer
Easy valve train system made up of 2 Ball Valves + 1 Refilling valve + 1 Anti pollution valve + 1 Strainer

18 itap automatic solar air vent

[ITAP] Automatic Solar Air Vent

Nickel plated brass 20c – 180c
Options
3/8” Pressure 10 bar /145psi
1/2” Pressure 10 bar /145psi

Solar Air Vent Valve.
Body in nickel-plated brass.
Minimum and maximum working temperatures: -20°C, 180°C.
Nominal pressure: 10 bar.
Thread ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

16 itap automatic air vent check valve

[ITAP] Automatic Air Vent Check Valve

Nickel plated brass max working temp 110c
Automatic Air Vent Check Valve.
Body nickel-plated brass.
Suitable for the use together with automatic air vent valves art 362 – 362R – 363 – 364 – 364R.
Maxi working temperature: 110°C.
Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

15 itap automatic air vent valve

[ITAP] Automatic Air Vent Valve

Automatic Air Vent Nickel plated brass max working temp 110°C.
Body nickel-plated brass.
Float in polyethilenic resin. O-ring in NBR.
Maxi working temperature: 110°C.
MAX DISCHARGE PRESSURE: 6 bar.
Threads: SO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

14 ivar thermostatic mixing valve 1402

IVAR 3 Way Thermostatic Mixing Valve

3 Way axiel mixing valve DN32.
3 Way Thermostatic Axial Mixing Valve.

Thermostatic axial mixing valve for high flow capacity with female connection The 3-way axial mixing valve (DN 32) is designed to mix hot and cold water in systems with high flow with 13Kw valve.

13 itap diaphragm safety relief valve

[ITAP] Diaphragm Safety Relief Valve

Diaphragm Safety Relief Valve 1/2″ D15
Options
1/2″ DN 15, 3 Pressure
1/2″ DN 15, 6 Pressure

Diaphragm Safety Relief Valve.

Nickle Plated Brass ½” D15 pressure.
Stainless Steel Spring Available Settings 1.5-1.8-2.5-3-4-6 bar.
Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228]

12 ivar thermostatic mixing valve

IVAR Thermostatic Mixing Valve

3 x1 With lateral mixer 3rd range DN 25 15-60c. 1“ F x 1“ F x 1“ F – Kv = 2,7.
Thermostatic Mixing Valve.

The valves in this section are piston mixers controlled by an external thermostatic actuator, eqipped with a remote probe (T5011, T 5012, T 3011, T 3012) or motorized for modulating regulation by means of NRV 24, NRV 230, SRV 24 motors or TE3061 electrothermal actuator.

The only difference between MR 02 and MR 03 is the position of the ways (+; -; MIX) making easier their use in several situations. MR 01, instead, is specially constructed for specific use in mixing systems for radiant systems.
In these cases, its function is not precisely that of a mixer but substantially that of a 2-way thermostatic valve with open bypass on return from the radiant circuit.

The flow inlet in this bypass is adjusted by means of AC 662.

11 itap pressure guage

[ITAP] Pressure Gauge

Pressure gauge bottom connection, 1/4” 0 – 10bar Pressure gauge.
Complying with ISPESL regulation. Diameter mm. 63.
Size of the connection: 1/4”. Scale: 0-10 bar.
Taper thread ISO 7/1 R (equivalent to DIN EN 10226-1 and BS EN 10226-1).

10 itap check valve

[ITAP] Check Valve

Brass Body. Washer in NBR, Stainless Steel Spring Sizes 3/8″ – 4″

Options
1/2” Din 15. 12 bar/174psi
3/4” Din 20. 12 bar/174psi
1” Din 25. 12 bar/174psi
1”1/4 Din 32. 10 bar/145psi
1”1/2 Din 40. 10 bar/145psi
2” Din 50. 10 bar/145psi

Check Valve. Body Brass. Plate polymer. Washer in NBR. Spring in stainless steel. Min –Max temperatures: 20°C – 60°C. Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228].
Suitable for domestic water services heating air conditioning.
In stall any position.

9 itap thermometer pressure gauge

[ITAP] Thermometer & Pressure Gauge

Thermometer and pressure gauge,back connection. ith bottom connection. 1/2” 0-4 Bar.Scale: 0°c -120° 63 mm diameter. Diameter mm.63. Size of the connection: 1/2”. Scale: 0°C-120°C, 0-4 bar. Taper thread ISO 7/1 R (equivalent to DIN EN 10226-1 and BS EN 10226-1).

8 ivar anti pollution valve

IVAR Anti Pollution Valve

Anti Pollution non return valve 3/4″ – L58mm. Anti-Pollution Non-return Valve with NF certification. The check valves are a anti polulution device that prevent the flow direction reversal and water contamination.

6 itap strainers

[ITAP] Strainers

Strainer Brass Body. Sizes 1/4″ – 2″ Female/female threads.
Options
1/2” Strainer Brass Body. Din 15. 20 bar/290psi
3/4 Strainer Brass Body. Din 20. 20 bar/290psi
1” Strainer Brass Body. Din 25. 20 bar/290psi
1”1/4 Strainer Brass Body. Din 32. 20 bar/290psi
1”1/2 Strainer Brass Body. Din 40. 20 bar/290psi
2” Strainer Brass Body. Din 50. 20 bar/290psi

Ideal for Hydronic Heating & Cooling, HVAC systems. Female/Female threads,inspection plug.Body in nickel-plated brass. Minimum and maximum working temperatures -20ºC, 110ºC in absence of steam.
Filtration degree: ¼” through 2” 500µm; 2”, ½”,3”,4” 800µm
Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228] Suitable for domestic water services heating air conditioning.
In stall any position.

2 Itap gas ball valve

[ITAP] Gas Ball Valve

Size *
1/2” Ball valve nickel plated Din 15. 5 bar/72.5psi
3/4” Ball valve nickel plated Din 20. 5 bar/72.5psi

Gas Ball Valve Full Flow.

Female/Female or Male/Female threads.
Body in nickel-plated brass. Minimum and maximum working temperature: 20ºC, 60ºC.T handle in aluminium. Female threads ISO7/1 Rp parallel [Equivalent to DIN EN 1026-1 & BS EN 10226-1]. Male threads ISO7/1 R Taper [Equivalent to DIN EN 1026-1 & BS EN 10226-1]
EN 332 Approved.
AGA: Approved.

1 itap full flow ball valve

[ITAP] Full Flow Ball Valve

Full Flow Ball Valve.Nickle plated comes in 4 sizes 1/2″ to 1 1/4″.

Options
1/2” Full flow valve nickel plated Din 15. 50 bar/725ps
3/4″ Full flow valve nickel plated Din 20. 40 bar/580psi
1” Full flow valve nickel plated Din 25. 40 bar/580psi
1”1/4 Full flow valve nickel plated Din 30. 30 bar/580psi

Full Flow Ball Valve.
Suitable for heating and HVAC Systems,Female/Female or Male/Female threads. Body in nickel-plated brass. Minimum and maximum working temperatures:-20°C, 150ºC in absence of steam.T handle in aluminium. Thread sizes DN 1/2 ” – 3/4″ – 1″ – 1¼”. Lever handle in steel T handle in Aluminium. Body nickel plated brass.

Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228]