Showing 1–16 of 28 results

tva yellow1

[AVG] 20 mm Tempering Valve Assembly

AVG: 20 MM TEMPERING VALVE ASSEMBLY 
Suitable for strong water system cold water supply temp: 5ºC -25ºC, hot
water supply temp: 65ºC – 85ºC . Flow Rate. 4Ltr/min

Details

TVA20C-1 20mm Tempering Valve
TVA15C-1 15mm Tempering Valve

Solar Tempering Valve

[AVG] 20 mm/15 mm Tempering Valve Assembly

AVG: 20 MM TEMPERING VALVE ASSEMBLY 
Suitable for Solar +instantaneous hot water system ,cold water supply
temp: 5ºC -25ºC, Hot water supply temp: 65ºC – 99ºC
Adjustable outlet temp range 40ºC – 50ºC. Flow rate Min. 4Ltr/min.

Details

TVA20CHP-1 20mm Tempering Valve c/w. With Insulation boot
TVA15CHP-1 15mm Tempering Valve c/w. With Insulation boot

20 mm pressure reducing valve

[AVG] 20mm Pressure Reducing Valve

AVG: 20 MM PRESSURE REDUCING VALVE
Non Return Isolation Pressure reduction valve Combination Adjustable

Range 150-600 kPa, Factory set at 500kPa, Max Inlet Pressure

1600kPa, Max working Temp: 80ºC, Flow rate K @ 700 kPa.

Details
PRV20 20mm 3/4”

AVG PRESSURE LV FXF

[AVG] High Pressure Temperature Relief Valve

AVG: HIGH PRESSURE TEMPERATURE RELIEF VALVE
Ideal for installation with high-pressure storage water heaters.

Suits inlet pressures up to 2000Kpa, operates at up to 80ºC.

 

Details
PLV20/600F   Pressure Setting 600kPa

PLV20/500F  Pressure Setting 500kPa

PLV20/350F  Pressure Setting 350kPa

Untitled

[AVG] Pressure Temperature Relief Valve

AVG: Pressure Temperature Relief Valve 
The Pressure and Temperature Relief valve (PTR) is designed to relive

the increase in pressure caused by water expansion during the normal

heating cycle.

Details
PRT20/1000  20mm 3/4” P&T Relief Valve

3 Itap angle ball valve full flow for manifold

[ITAP] Angle Ball Valve Full Flow For Manifold

1/2”, DN15 5bar/72.5psi

Options
1/2”, DN15 5bar/72.5psi
3/4” DN20 5bar/72.5psi
1” DN25

Angle Ball Valve, full flow for manifolds. Suitable for domestic water services, heating and air-conditioning plants, compressed air systems. Male/female threads. T handle in aluminium. Angle body in nickel-plated brass. Minimum and maximum working temperatures: -20°C, 150°C

4 itap angle ball valve with o ring full flow for manifold

[ITAP] Angle Ball Valve With O-Ring Full Flow For Manifold

Male/female threads. 1/2” – 1″ DN15 5bar/72.5psi nickel-plated brass.working temperatures: -20°C, 150°C

Options
1/2”, DN15 5bar/72.5psi
3/4” DN20 5bar/72.5psi
1” DN25

Male/female threads. T handle in aluminium. Angle body in nickel-plated brass. Minimum and maximum working temperatures: -20°C, 150°C

16 itap automatic air vent check valve

[ITAP] Automatic Air Vent Check Valve

Nickel plated brass max working temp 110c
Automatic Air Vent Check Valve.
Body nickel-plated brass.
Suitable for the use together with automatic air vent valves art 362 – 362R – 363 – 364 – 364R.
Maxi working temperature: 110°C.
Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

15 itap automatic air vent valve

[ITAP] Automatic Air Vent Valve

Automatic Air Vent Nickel plated brass max working temp 110°C.
Body nickel-plated brass.
Float in polyethilenic resin. O-ring in NBR.
Maxi working temperature: 110°C.
MAX DISCHARGE PRESSURE: 6 bar.
Threads: SO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

18 itap automatic solar air vent

[ITAP] Automatic Solar Air Vent

Nickel plated brass 20c – 180c
Options
3/8” Pressure 10 bar /145psi
1/2” Pressure 10 bar /145psi

Solar Air Vent Valve.
Body in nickel-plated brass.
Minimum and maximum working temperatures: -20°C, 180°C.
Nominal pressure: 10 bar.
Thread ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

10 itap check valve

[ITAP] Check Valve

Brass Body. Washer in NBR, Stainless Steel Spring Sizes 3/8″ – 4″

Options
1/2” Din 15. 12 bar/174psi
3/4” Din 20. 12 bar/174psi
1” Din 25. 12 bar/174psi
1”1/4 Din 32. 10 bar/145psi
1”1/2 Din 40. 10 bar/145psi
2” Din 50. 10 bar/145psi

Check Valve. Body Brass. Plate polymer. Washer in NBR. Spring in stainless steel. Min –Max temperatures: 20°C – 60°C. Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228].
Suitable for domestic water services heating air conditioning.
In stall any position.

13 itap diaphragm safety relief valve

[ITAP] Diaphragm Safety Relief Valve

Diaphragm Safety Relief Valve 1/2″ D15
Options
1/2″ DN 15, 3 Pressure
1/2″ DN 15, 6 Pressure

Diaphragm Safety Relief Valve.

Nickle Plated Brass ½” D15 pressure.
Stainless Steel Spring Available Settings 1.5-1.8-2.5-3-4-6 bar.
Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228]

1 itap full flow ball valve

[ITAP] Full Flow Ball Valve

Full Flow Ball Valve.Nickle plated comes in 4 sizes 1/2″ to 1 1/4″.

Options
1/2” Full flow valve nickel plated Din 15. 50 bar/725ps
3/4″ Full flow valve nickel plated Din 20. 40 bar/580psi
1” Full flow valve nickel plated Din 25. 40 bar/580psi
1”1/4 Full flow valve nickel plated Din 30. 30 bar/580psi

Full Flow Ball Valve.
Suitable for heating and HVAC Systems,Female/Female or Male/Female threads. Body in nickel-plated brass. Minimum and maximum working temperatures:-20°C, 150ºC in absence of steam.T handle in aluminium. Thread sizes DN 1/2 ” – 3/4″ – 1″ – 1¼”. Lever handle in steel T handle in Aluminium. Body nickel plated brass.

Threads: ISO228 [Equivalent DIN EN ISO228 BS EN ISO228]

2 Itap gas ball valve

[ITAP] Gas Ball Valve

Size *
1/2” Ball valve nickel plated Din 15. 5 bar/72.5psi
3/4” Ball valve nickel plated Din 20. 5 bar/72.5psi

Gas Ball Valve Full Flow.

Female/Female or Male/Female threads.
Body in nickel-plated brass. Minimum and maximum working temperature: 20ºC, 60ºC.T handle in aluminium. Female threads ISO7/1 Rp parallel [Equivalent to DIN EN 1026-1 & BS EN 10226-1]. Male threads ISO7/1 R Taper [Equivalent to DIN EN 1026-1 & BS EN 10226-1]
EN 332 Approved.
AGA: Approved.

11 itap pressure guage

[ITAP] Pressure Gauge

Pressure gauge bottom connection, 1/4” 0 – 10bar Pressure gauge.
Complying with ISPESL regulation. Diameter mm. 63.
Size of the connection: 1/4”. Scale: 0-10 bar.
Taper thread ISO 7/1 R (equivalent to DIN EN 10226-1 and BS EN 10226-1).